GALLING BEHAVIOR IN SQUARE CUP DRAWING OF HIGH TENSILE STRENGTH STEEL SHEET

被引：0

作者：

Tanabe, Keisuke ^{[1
]}

Yang, Mingxu ^{[1
]}

Yoshikawa, Yasuharu ^{[1
]}

Wang, Zhigang ^{[1
]}

机构：

[1] Gifu Univ, Dept Mech Syst Engn, 1-1 Yanagido, Gifu 5011193, Japan

来源：

ENGINEERING PLASTICITY AND ITS APPLICATIONS | 2010年

关键词：

Deep drawing; Tribology; Galling; High tensile strength steel sheet;

D O I：

暂无

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

A series of experiments have been carried out to investigate the galling behavior in macro-scale in the square cup drawing of a high tensile strength steel sheet. On the die surface, galling occurs at the bottom of the boundary between the straight and corner, and grows upward with the number of drawing cycles. Galling on the drawn cup starts at the top of the same boundary and grows downward with the number of drawing cycles. With decreasing the blank holding pressure or increasing the sliding distance, galling becomes remarked. Galling behavior has been discussed based on the simulation result of FEM.

引用

页码：409 / 413

页数：5

共 34 条

[21] Performance of CrN radical nitrided tools on deep drawing of advanced high strength steel
Sresomroeng, B.
Premanond, V.
Kaewtatip, P.
Khantachawana, A.
Kurosawa, A.
Koga, N.
SURFACE & COATINGS TECHNOLOGY, 2011, 205 (17-18): : 4198 - 4204
[22] Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets
A. Gåård
P. Krakhmalev
J. Bergström
Tribology Letters, 2009, 33 : 45 - 53
[23] Wear Mechanisms in Galling: Cold Work Tool Materials Sliding Against High-strength Carbon Steel Sheets
Gaard, A.
Krakhmalev, P.
Bergstrom, J.
TRIBOLOGY LETTERS, 2009, 33 (01) : 45 - 53
[24] Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet
Seung Mi Baek
Jung Gi Kim
Jae Ik Yoon
Min Hong Seo
Won Tae Cho
Kwang-Geun Chin
Sunghak Lee
Hyoung Seop Kim
International Journal of Material Forming, 2018, 11 : 11 - 18
[25] Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet
Baek, Seung Mi
Kim, Jung Gi
Yoon, Jae Ik
Seo, Min Hong
Cho, Won Tae
Chin, Kwang-Geun
Lee, Sunghak
Kim, Hyoung Seop
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2018, 11 (01) : 11 - 18
[26] Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature
Sudhy S. Panicker
Har Govind Singh
Sushanta Kumar Panda
Richard Dashwood
Journal of Materials Engineering and Performance, 2015, 24 : 4267 - 4282
[27] Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature
Panicker, Sudhy S.
Singh, Har Govind
Panda, Sushanta Kumar
Dashwood, Richard
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (11) : 4267 - 4282
[28] Frictional properties of new developed cold work tool steel for high tensile strength steel forming die
Kubota, Kunichika
Ohba, Takuya
Morito, Shigekazu
WEAR, 2011, 271 (11-12) : 2884 - 2889
[29] Cold forge spot-bonding of high tensile strength steel and aluminum alloy sheets
Miwada, Yuri
Ishiguro, Takahiro
Abe, Eiji
Yukawa, Nobuki
Ishikawa, Takashi
Suganuma, Tomoaki
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 2006 - 2011
[30] Fuzzy logic model-based punch force prediction for deep drawing of high strength steel
Charan, K. S. Maanav
Aswin, Alenkar K.
Elango, M.
Sivarajan, S.
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 1107 - 1114

← 1 2 3 4 →