Fatigue of metallic microdevices and the role of fatigue-induced surface oxides

被引：56

作者：

Boyce, BL ^{[1
]}

Michael, JR ^{[1
]}

Kotula, PG ^{[1
]}

机构：

[1] Sandia Natl Labs, Mat & Proc Sci Ctr, Albuquerque, NM 87185 USA

来源：

ACTA MATERIALIA | 2004年 / 52卷 / 06期

关键词：

fatigue; nickel; electroplating; oxidation; analytical electron microscopy;

D O I：

10.1016/j.actamat.2003.12.032

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new method for fatigue testing of metallic micro-electro-mechanical systems has been developed and applied to characterize the high-cycle fatigue behavior of nickel microspecimens formed by the LIGA process. Cantilever microbeams with a cross-section of 26 x 250 mum were tested under fully reversed loading conditions at 20 Hz. The observed stress-life curve and fatigue limit was similar to what has typically been reported for conventional bulk nickel. SEM inspection of the fatigue surface revealed that failure initiated in zones of localized extrusions and intrusions associated with persistent slip bands (PSBs). Focused ion beam machining was used to extract a cross-sectional TEM foil from the deformation zone, revealing an unexpected thick (up to 400 nm) oxide on the surface of the PSBs. This PSB oxide thickening mechanism appears to be the source of crack initiation. Published by Elsevier Ltd on behalf of Acta Materialia Inc.

引用

页码：1609 / 1619

页数：11

共 28 条

[1] THE LIGA TECHNIQUE AND ITS POTENTIAL FOR MICROSYSTEMS - A SURVEY [J].

BACHER, W ;

MENZ, W ;

MOHR, J .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 1995, 42 (05) :431-441

[2]

Becker E. W., 1986, Microelectronic Engineering, V4, P35, DOI 10.1016/0167-9317(86)90004-3

[3]

BOYCE BL, 2003, SOC PHOTO OPT I, V4980, P175

[4] THE EMBRITTLEMENT OF NICKEL FOLLOWING HIGH-TEMPERATURE AIR EXPOSURE [J].

BRICKNELL, RH ;

WOODFORD, DA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (03) :425-433

[5] Microstructural and mechanical properties investigation of electrode posited and annealed LIGA nickel structures [J].

Buchheit, TE ;

LaVan, DA ;

Michael, JR ;

Christenson, TR ;

Leith, SD .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (03) :539-554

[6] ON THE VALIDITY OF THE HALL-PETCH RELATIONSHIP IN NANOCRYSTALLINE MATERIALS [J].

CHOKSHI, AH ;

ROSEN, A ;

KARCH, J ;

GLEITER, H .

SCRIPTA METALLURGICA, 1989, 23 (10) :1679-1683

[7] EXTRUSION AND INTRUSION BY CYCLIC SLIP IN COPPER [J].

COTTRELL, AH ;

HULL, D .

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1957, 242 (1229) :211-&

[8]

DEITER G, 1976, MECH METALLURGY

[9] A MODEL OF EXTRUSIONS AND INTRUSIONS IN FATIGUED METALS .2. SURFACE ROUGHENING BY RANDOM IRREVERSIBLE SLIP [J].

DIFFERT, K ;

ESSMANN, U ;

MUGHRABI, H .

PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1986, 54 (02) :237-258

[10] STRAIN LOCALIZATION IN CYCLIC DEFORMATION OF COPPER SINGLE-CRYSTALS [J].

FINNEY, JM ;

LAIRD, C .

PHILOSOPHICAL MAGAZINE, 1975, 31 (02) :339-366

← 1 2 3 →