Influence of tempering on microstructure and mechanical properties of Ti alloyed 13%Cr supermartensitic stainless steel

被引：15
作者：
Tavares, S. S. M. [1 ]
Pardal, J. M. [1 ]
de Souza, G. C. [1 ]
de Oliveira, C. A. S. [2 ]
de Abreu, H. F. G. [3 ]
机构：
[1] Univ Fed Fluminense, PGMEC, BR-24210240 Niteroi, RJ, Brazil
[2] Univ Fed Santa Catarina, PGMAT, Programa Pograd Ciencia & Engn Mat, BR-88040900 Florianopolis, SC, Brazil
[3] Univ Fed Ceara, Dept Engn Met & Mat, Fortaleza, Ceara, Brazil
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2014年 / 30卷 / 12期
关键词：
Supermartenstic stainless steel; Quenching and tempering; Microstructure; CORROSION; CRACKING;
D O I：
10.1179/1743284713Y.0000000448
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tempering is the final heat treatment applied to martensitic steels. In conventional martensitic stainless steels or in the newly developed supermartensitic grades, the mechanical properties are strongly influenced by tempering. In the present work, several tempering treatments were performed in a Ti alloyed supermartensitic stainless steel. Tensile mechanical properties, hardness and impact toughness were measured and correlated to microstructural features. Microstructural analysis was conducted in a field emission gun scanning electron microscope and also by magnetic measurements. The ductility parameters continuously increased with tempering temperature, while yield and ultimate strength decreased. Secondary hardening and temper embrittlement were observed by hardness and low temperature impact tests respectively, while tensile tests were not sensitive to these phenomena.
引用
收藏
页码：1470 / 1476
页数：7
相关论文
共 18 条
  • [1] [Anonymous], 2009, E37009 ASTM
  • [2] ASTM, 2012, E2312C ASTM
  • [3] Bojack A., 2001, MATER CHARACT, V71, P77
  • [4] Effect of δ-ferrite on impact properties of supermartensitic stainless steel heat affected zones
    Carrouge, D
    Bhadeshia, HKDH
    Woollin, P
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (05) : 377 - 389
  • [5] Cullity D., 2009, Introduction to Magnetic Materials, V2nd
  • [6] Influence of heat treatments on toughness and sensitization of a Ti-alloyed supermartensitic stainless steel
    da Silva, G. F.
    Tavares, S. S. M.
    Pardal, J. M.
    Silva, M. R.
    de Abreu, H. F. G.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2011, 46 (24) : 7737 - 7744
  • [7] Folckhard E., 1999, WELDING METALLURGY S
  • [8] Hirata H., 1999, P C SUP STAINL, P11
  • [9] Kimura M., 2005, P C NACE CORR 2005
  • [10] Kimura M., 1997, P C NACE CORR 1997
12