Comparative microstructural and corrosion development of VCrNiCoFeCu equiatomic multicomponent alloy produced by induction melting and spark plasma sintering

被引：2

作者：

Fazakas, E. ^{[1
]}

Heczel, A. ^{[1
,2
]}

Molnar, D. ^{[3
,4
]}

Varga, B. ^{[5
]}

Zadorozhnyy, V. ^{[6
]}

Vida, A. ^{[1
,2
,7
]}

机构：

[1] Bay Zoltan Nonprofit Ltd Appl Res, Div Engn, Budapest, Hungary

[2] Eotvos Lorand Univ, Inst Mat Phys, Pazmany P Stny 1-A, H-1117 Budapest, Hungary

[3] Dalarna Univ, Mat Sci Grp, S-79188 Falun, Sweden

[4] Royal Inst Technol, Appl Mat Phys, Dept Mat Sci & Engn, SE-10044 Stockholm, Sweden

[5] Transilvania Univ Brasov, Bulevardul Eroilor 29, Brasov, Romania

[6] Natl Univ Sci & Technol MISIS, Leninsky Prosp 4, Moscow 119049, Russia

[7] Wigner Res Ctr Phys, Inst Solid State Phys & Opt, POB 49, H-1525 Budapest, Hungary

来源：

E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS | 2018年 / 329卷

基金：

俄罗斯科学基金会;

关键词：

HIGH-ENTROPY ALLOYS; HIGH-STRENGTH; DIFFUSION; BEHAVIOR;

D O I：

10.1088/1757-899X/329/1/012016

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The present study focuses on the corrosion behavior of a single-phase FCC high entropy alloy (VCrNiCoFeCu) casted by two different methods: induction melting and spark plasma sintering. The corrosion resistance has been evaluated using immersion tests in 3.5% NaCl solution, the potentiodynamic polarization measurements and the results are compared how is dependent the corrosion rate as a function of the production methods. Our results show that induction melted sample is stable in salty environment. On the other hand, based on the changes of polarization curves, there must be an evolution of oxide films on the SPSed sample until reaching the stable oxide layer.

引用

页数：9

共 50 条

[41] Improving corrosion resistance of spark plasma sintering-produced AlCoCrFeNi2.1 high entropy alloy via in-situ process pressure and temperature control [J].

Chu, Zhuonan ;

Shao, Zexi ;

Guo, Xiaosong ;

Li, Pubo ;

Wu, Bintao .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 :6581-6592

[42] Spark plasma sintering of TiNiFeCoCux (X=0, 0.2) dual-phase high entropy alloy: Microstructural, mechanical and tribological characteristics [J].

Asl, Farid Gharibi ;

Nourozi, Ali ;

Gashti, Milad ;

Aghdam, Rouhollah Mehdinavaz ;

Akbarpour, Mohammad Reza ;

Soltani, Reza ;

Pishbin, Fatemehsadat ;

Zali, Amir ;

Kim, Hyoung Seop .

JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1037

[43] Mechanical Properties and Microstructural Evolution of Ti-25Nb-6Zr Alloy Fabricated by Spark Plasma Sintering at Different Temperatures [J].

Zhu, Qing ;

Chen, Peng ;

Xiao, Qiushuo ;

Li, Fengxian ;

Yi, Jianhong ;

Prashanth, Konda Gokuldoss ;

Eckert, Juergen .

METALS, 2022, 12 (11)

[44] Microstructure, Corrosion Resistance, and Mechanical Properties of Biphase AlCrCoFeNi2.1 High Entropy Alloy Prepared by Spark Plasma Sintering [J].

Zheng Fanlin ;

Sun Tianming ;

Chi Hanjuan ;

Chen Hongsheng ;

Wang Wenxian .

RARE METAL MATERIALS AND ENGINEERING, 2022, 51 (11) :4039-4050

[45] The effect of powder size on the mechanical and corrosion properties and the ignition temperature of WE43 alloy prepared by spark plasma sintering [J].

Dvorsky, Drahomir ;

Kubasek, Jiri ;

Roudnicka, Michaela ;

Prusa, Filip ;

Necas, David ;

Minarik, Peter ;

Straska, Jitka ;

Vojtech, Dalibor .

JOURNAL OF MAGNESIUM AND ALLOYS, 2021, 9 (04) :1349-1362

[46] Microstructures and mechanical properties of Si and Zr modified Al-Zn-Mg-Cu alloy-A comparison between selective laser melting and spark plasma sintering [J].

Li, Lanbo ;

Li, Ruidi ;

Yuan, Tiechui ;

Chen, Chao ;

Wang, Mingbo ;

Yuan, Jiwei ;

Weng, Qigang .

JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 821

[47] Microstructures and mechanical properties of oxide dispersion strengthened CoCrFeNi high-entropy alloy produced by mechanical alloying and spark plasma sintering [J].

Li, Mingyang ;

Guo, Yuanhang ;

Wang, Hanlu ;

Shan, Jianfu ;

Chang, Yongqin .

INTERMETALLICS, 2020, 123

[48] Design of Mg-6wt%Al alloy with high toughness and corrosion resistance prepared by mechanical alloying and spark plasma sintering [J].

Lee, Chan Soo ;

Lee, Hee Chang ;

Kim, Gyeung-Ho ;

Han, Jun Hyun ;

Kim, Woo Jin ;

Kim, Hye Sung .

MATERIALS CHARACTERIZATION, 2019, 158

[49] Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering [J].

Kundu, Arnab ;

Sittiho, Anumat ;

Charit, Indrajit ;

Jaques, Brian ;

Jiang, Chao .

JOM, 2019, 71 (08) :2846-2855

[50] A Study on Microstructural Evolution and Corrosion Behavior of Ti36-Al16-V16-Fe16-Cr16 High-Entropy Alloy Fabricated via Spark Plasma Sintering Technology [J].

Uyor, Uwa O. ;

Popoola, Abimbola P. I. ;

Popoola, Olawale M. .

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (11) :3915-3925

← 1 2 3 4 5 →