Modified hinged beam test on steel fabric reinforced cementitious matrix (SFRCM)

被引：36

作者：

Falope, F. O. ^{[1
]}

Lanzoni, L. ^{[1
,2
]}

Tarantino, A. M. ^{[1
]}

机构：

[1] Univ Modena & Reggio Emilia, Dept Engn Enzo Ferrari, Via P Vivarelli 10, I-41125 Modena, Italy

[2] Univ San Marino, Via Salita Rocca 44, San Marino, CA 47890 USA

来源：

COMPOSITES PART B-ENGINEERING | 2018年 / 146卷

关键词：

FRCM; Modified hinged beam test; Steel fibres; Slip profiles; Fracture opening; Ferrocement; FRACTURE-MECHANICS; STRUCTURAL SYSTEM; CONCRETE JOINTS; FIBER; BEHAVIOR; BOND; FRP; COMPOSITES; MODELS;

D O I：

10.1016/j.compositesb.2018.03.019

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

An experimental campaign based on modified hinged beam test (MhBT) set-up has been reported in the present study. The samples consist of two concrete blocks coupled by a proper hinge device and laminated with steel wire fabrics embedded in a cementitious mortar layer. Two kinds of fabrics, made of galvanized steel strands with different mesh spacing, have been used to reinforce the concrete joists. With the aid of a DIC monitoring system, slippage profile at the interface between the concrete support and the mortar laminate along the contact region has been assessed, together with the fracture opening. Force vs slippage at the interface has been retrieved for the samples tested according to the MhBT set-up. With the aim to obtain predictive ultimate load design formulas, a novel classification of laminate here proposed will be argued and related to a MhBT design formula. The influence of peel and shear stresses interaction on the ultimate strength of the system has been discussed in detail.

引用

页码：232 / 243

页数：12

共 45 条

[1]

[Anonymous], 5491R93 ACI COMM

[2]

[Anonymous], DT200 CNR IT NAT RES

[3] Analogies between nonlocal and local Bernoulli-Euler nanobeams [J].

Barretta, Raffaele ;

de Sciarra, Francesco Marotti .

ARCHIVE OF APPLIED MECHANICS, 2015, 85 (01) :89-99

[4] Small-scale effects in nanorods [J].

Barretta, Raffaele ;

de Sciarra, Francesco Marotti ;

Diaco, Marina .

ACTA MECHANICA, 2014, 225 (07) :1945-1953

[5] Single-lap shear bond tests on Steel Reinforced Geopolymeric Matrix-concrete joints [J].

Bencardino, Francesco ;

Condello, Antonio ;

Ashour, Ashraf F. .

COMPOSITES PART B-ENGINEERING, 2017, 110 :62-71

[6]

Bizindavyi L., 1999, J. Compos. Constr, V3, P153, DOI 10.1061/(ASCE)1090-0268(1999)3:4(153)

[7]

Buyukozturk O., 2006, Seventh International Congress on Advances in Civil Engineering, Yildiz Technical University, P1

[8] Punching shear behavior of lightweight fiber reinforced concrete slabs [J].

Caratelli, Angelo ;

Imperatore, Stefania ;

Meda, Alberto ;

Rinaldi, Zila .

COMPOSITES PART B-ENGINEERING, 2016, 99 :257-265

[9] Loading rate effect on the debonding phenomenon in fiber reinforced cementitious matrix-concrete joints [J].

Carloni, Christian ;

Verre, Salvatore ;

Sneed, Lesley H. ;

Ombres, Luciano .

COMPOSITES PART B-ENGINEERING, 2017, 108 :301-314

[10] Investigation of sub-critical fatigue crack growth in FRP/concrete cohesive interface using digital image analysis [J].

Carloni, Christian ;

Subramaniam, Kolluru V. .

COMPOSITES PART B-ENGINEERING, 2013, 51 :35-43

← 1 2 3 4 5 →