Wettability of molten Na2CO3-K2CO3 on coal fly ash ceramic substrates with expanded graphite

被引:6
作者
Wang, Tieying [1 ]
Wang, Kaichen [1 ]
Zhang, Tianying [1 ]
Ye, Feng [1 ]
Liao, Zhirong [1 ]
Xu, Chao [1 ]
机构
[1] North China Elect Power Univ, Sch Energy Power & Mech Engn, Key Lab Power Stn Energy Transfer Convers & Syst, MOE, Beijing 102206, Peoples R China
基金
国家重点研发计划; 中国国家自然科学基金;
关键词
Wettability; Contact angle; Eutectic carbonate salt; Coal fly ash; Expanded graphite; PHASE-CHANGE MATERIALS; THERMAL-ENERGY STORAGE; CONDUCTIVITY ENHANCEMENT; LATENT-HEAT; COMPOSITE; SALT; STABILITY; DIATOMITE; MIXTURES; SURFACES;
D O I
10.1016/j.matchemphys.2020.123861
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The wettability of materials influences highly the stability of form-stable phase change materials (FSPCMs). In this study, the wetting behavior of Na2CO3-K2CO3 on the coal fly ash (CFA) ceramic substrates with different expanded graphite (EG) contents was studied through contact angle measurements at 707 degrees C. The influences of surface microstructure of substrates, adhesion of molten salt to the substrates, and salt infiltration during the contact angle measurements were taken into consideration. The results found that the eutectic carbonate salt on the CFA ceramic substrates generally showed a good wettability, which can be influenced by the surface microstructure of the CFA ceramic substrates and the adhesion of molten salt to the substrates. Due to the presence of salt infiltration phenomenon during the experiments, the measured contact angle should be modified to eliminate the infiltration effect. Increasing the EG content in the substrates caused a decrease of surface roughness of substrate and salt infiltration, resulting in the evident increase of modified contact angle. Besides, using high forming pressure of the prepared substrate also decreased the surface cracks and surface roughness, and increased the modified contact angle.
引用
收藏
页数:9
相关论文
共 50 条
[1]   A review on the utilization of fly ash [J].
Ahmaruzzaman, M. .
PROGRESS IN ENERGY AND COMBUSTION SCIENCE, 2010, 36 (03) :327-363
[2]   Experimental determination of temperature-dependent thermal conductivity of solid eicosane-based silver nanostructure-enhanced phase change materials for thermal energy storage [J].
Al Ghossein, Rabih M. ;
Hossain, Mohammad Sharif ;
Khodadadi, J. M. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 107 :697-711
[3]   MEASUREMENT OF THERMO-PHYSICAL PROPERTIES OF MOLTEN-SALTS - MIXTURES OF ALKALINE CARBONATE SALTS [J].
ARAKI, N ;
MATSUURA, M ;
MAKINO, A ;
HIRATA, T ;
KATO, Y .
INTERNATIONAL JOURNAL OF THERMOPHYSICS, 1988, 9 (06) :1071-1080
[4]   Thermal properties measurement and heat storage analysis of paraffinnanoparticles composites phase change material: Comparison and optimization [J].
Babapoor, Aziz ;
Karimi, Gholamreza .
APPLIED THERMAL ENGINEERING, 2015, 90 :945-951
[5]   A review of the multi-component utilisation of coal fly ash [J].
Blissett, R. S. ;
Rowson, N. A. .
FUEL, 2012, 97 :1-23
[6]   Research progress of phase change materials (PCMs) embedded with metal foam (a review) [J].
Chen, Jianqing ;
Yang, Donghui ;
Jiang, Jinghua ;
Ma, Aibin ;
Song, Dan .
8TH INTERNATIONAL CONFERENCE ON POROUS METALS AND METALLIC FOAMS, 2014, 4 :389-394
[7]   Wettability and spreading kinetics of Al and Mg on TiC [J].
Contreras, A ;
León, CA ;
Drew, RAL ;
Bedolla, E .
SCRIPTA MATERIALIA, 2003, 48 (12) :1625-1630
[8]  
Eustathopoulus Nicolas., 1999, Wettability at High Temperatures
[9]   Thermal conductivity enhancement of phase change materials for thermal energy storage: A review [J].
Fan, Liwu ;
Khodadadi, J. M. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2011, 15 (01) :24-46
[10]   Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives [J].
Fu, Yuan-Xiang ;
He, Zhuo-Xian ;
Mo, Dong-Chuan ;
Lu, Shu-Shen .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2014, 86 :276-283