All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide

被引:36
|
作者
Hsiao, Yu-Sheng [1 ]
Chen, Chih-Ping [2 ]
Chao, Ching-Hsun [3 ]
Whang, Wha-Tzong [1 ]
机构
[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
[2] Ind Technol Res Inst, Mat & Chem Res Labs, Hsinchu 300, Taiwan
[3] Mingdao Univ, Dept Mat Sci & Engn, Changhua, Taiwan
关键词
All-solution-process; Inverted polymer solar cells; PEDOT/PSS; SULFONATE) FILM; WORK FUNCTION; THIN-FILMS; CONDUCTIVITY; METALLIZATION; ENHANCEMENT; MECHANISM; LAYER; OXIDE;
D O I
10.1016/j.orgel.2009.01.012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we prepared all-solution-processed inverted polymer solar cells (PSCs) incorporating two solution-processed electrodes-surface-nickelized polyimide films (NiPI films) as cathodes and high-conductivity poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) films as anodes-and an active layer with a bulk heterojunction morphology of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-buytyric acid methyl ester (PCBM). The granular Ni thin films, which exhibited good adhesion and high-conductivity (ca. 2778 S cm(-1)) on the polyimide (PI) substrates and possessed a work function different from that of pure Ni metal (WF, 5.4 eV). Using ultraviolet photoelectron spectroscopy, we determined that the WF of the NiPI films was ca. 3.9 eV. Prior to the coating of the photoactive layer, the surface of the NiPI films were treated with titanium(diisopropoxide)bis(2,4-pentanedionate) (TIPD) solution to facilitate the deposition of high-quality active layer and further as a hole blocking layer. The solution processed anodes (solvent-modified PEDOT:PSS films) were further coated and subjected to mild oxygen plasma treatment on the active layer. Short exposure (5 s) to the plasma improved the quality of the surface of the active layer for PEDOT:PSS deposition. These inverted PSCs on flexible granular NiPI films provided a power conversion efficiency of 2.4% when illuminated under AM 1.5 conditions (100 mW cm(-2)). The phenomenon of light absorption enhancement in those inverted PSCs was observed as indicated in reflective UV-vis, haze factor and external quantum efficiency (EQE) responses. The resulting fill factor (FF) of 0.43 is still significantly lower than the FF of 0.64 for standard devices. When compared to the planar structure, the improvement of absorbance of light and good haze factors was obtained for granular structure which suggests NiPI as a better back contact electrode through enhancing the light trapping and scattering in inverted PSCs. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:551 / 561
页数:11
相关论文
共 50 条
  • [41] Low-Temperature Solution-Processed Electron Transport Layers for Inverted Polymer Solar Cells
    Zhang, Jiaqi
    Faria, Jorge C. D.
    Morbidoni, Maurizio
    Porte, Yoann
    Burgess, Claire H.
    Harrabi, Khallil
    McLachlan, Martyn A.
    ADVANCED ELECTRONIC MATERIALS, 2016, 2 (06):
  • [42] Solution processed all-carbon solar cells
    Tung, Vincent C.
    Kim, Jaemyung
    Chu, Chih-Wei
    Huang, Jiaxing
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2012, 244
  • [43] Squaraine based solution processed inverted bulk heterojunction solar cells processed in air
    Varma, P. C. Reshmi
    Namboothiry, Manoj A. G.
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2016, 18 (05) : 3438 - 3443
  • [44] Amine-Free ZnO Precursor to Suppress Dedoping of PEDOT Electrodes for All-Solution-Processed Flexible Organic Solar Cells
    Chen, Jianping
    Jiang, Pei
    Liu, Yang
    Dong, Xinyun
    Cheng, Jingyu
    Qin, Fei
    Jiang, Youyu
    Zhou, Yinhua
    ACS APPLIED ENERGY MATERIALS, 2023, 6 (13) : 7283 - 7288
  • [45] All-Solution-Processed, All-Organic Flexible Transistor and Circuit Based on Dry-Transfer Polymer Films
    Guo, Shanlei
    Sun, Jing
    Wang, Xue
    Tong, Yanhong
    Tang, Qingxin
    Liu, Yichun
    ADVANCED ELECTRONIC MATERIALS, 2025, 11 (02):
  • [46] Device physics of inverted all-polymer solar cells
    Brenner, Thomas J. K.
    Hwang, Inchan
    Greenham, Neil C.
    McNeill, Christopher R.
    JOURNAL OF APPLIED PHYSICS, 2010, 107 (11)
  • [47] Inverted CsPbI3 perovskite solar cells with all solution processed layers fabricated in high humidity
    Sangwon Lee
    Sujin Cho
    Seok-Hyun Jeong
    Wonkyu Lee
    Dowon Pyun
    Jiyeon Nam
    Ji-Seong Hwang
    Youngmin Kim
    Jihyun Jang
    Yoonmook Kang
    Donghwan Kim
    Hae-Seok Lee
    Communications Materials, 6 (1)
  • [48] Application of Solvent Modified PEDOT:PSS in All-Solution-Processed Inverted Quantum Dot Light-Emitting Diodes
    Pan, Jiangyong
    Huang, Qianqian
    Zhang, Yuning
    Chen, Jing
    Tao, Zhi
    He, Chao
    Zhou, Kaifeng
    Lei, Wei
    JOURNAL OF DISPLAY TECHNOLOGY, 2016, 12 (10): : 1157 - 1161
  • [49] Boosting electron extraction of inverted polymer solar cells using solution-processed nanocrystals as cathode interlayer
    Zhang, Zhihui
    Zhang, Dezhong
    Liu, Chunyu
    Li, Zhiqi
    Zhang, Xinyuan
    Guo, Wenbin
    Zhang, Liu
    ELECTROCHIMICA ACTA, 2017, 258 : 477 - 484
  • [50] Studies on solution-processed tungsten oxide nanostructures for efficient hole transport in the inverted polymer solar cells
    Remya, R.
    Gayathri, P. T. G.
    Deb, Biswapriya
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 255