All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide

被引:36
|
作者
Hsiao, Yu-Sheng [1 ]
Chen, Chih-Ping [2 ]
Chao, Ching-Hsun [3 ]
Whang, Wha-Tzong [1 ]
机构
[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
[2] Ind Technol Res Inst, Mat & Chem Res Labs, Hsinchu 300, Taiwan
[3] Mingdao Univ, Dept Mat Sci & Engn, Changhua, Taiwan
关键词
All-solution-process; Inverted polymer solar cells; PEDOT/PSS; SULFONATE) FILM; WORK FUNCTION; THIN-FILMS; CONDUCTIVITY; METALLIZATION; ENHANCEMENT; MECHANISM; LAYER; OXIDE;
D O I
10.1016/j.orgel.2009.01.012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we prepared all-solution-processed inverted polymer solar cells (PSCs) incorporating two solution-processed electrodes-surface-nickelized polyimide films (NiPI films) as cathodes and high-conductivity poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) films as anodes-and an active layer with a bulk heterojunction morphology of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-buytyric acid methyl ester (PCBM). The granular Ni thin films, which exhibited good adhesion and high-conductivity (ca. 2778 S cm(-1)) on the polyimide (PI) substrates and possessed a work function different from that of pure Ni metal (WF, 5.4 eV). Using ultraviolet photoelectron spectroscopy, we determined that the WF of the NiPI films was ca. 3.9 eV. Prior to the coating of the photoactive layer, the surface of the NiPI films were treated with titanium(diisopropoxide)bis(2,4-pentanedionate) (TIPD) solution to facilitate the deposition of high-quality active layer and further as a hole blocking layer. The solution processed anodes (solvent-modified PEDOT:PSS films) were further coated and subjected to mild oxygen plasma treatment on the active layer. Short exposure (5 s) to the plasma improved the quality of the surface of the active layer for PEDOT:PSS deposition. These inverted PSCs on flexible granular NiPI films provided a power conversion efficiency of 2.4% when illuminated under AM 1.5 conditions (100 mW cm(-2)). The phenomenon of light absorption enhancement in those inverted PSCs was observed as indicated in reflective UV-vis, haze factor and external quantum efficiency (EQE) responses. The resulting fill factor (FF) of 0.43 is still significantly lower than the FF of 0.64 for standard devices. When compared to the planar structure, the improvement of absorbance of light and good haze factors was obtained for granular structure which suggests NiPI as a better back contact electrode through enhancing the light trapping and scattering in inverted PSCs. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:551 / 561
页数:11
相关论文
共 50 条
  • [31] All-Solution-Processed Metal-Oxide-Free Flexible Organic Solar Cells with Over 10% Efficiency
    Song, Wei
    Fan, Xi
    Xu, Bingang
    Yan, Feng
    Cui, Huiqin
    Wei, Qiang
    Peng, Ruixiang
    Hong, Ling
    Huang, Jiaming
    Ge, Ziyi
    ADVANCED MATERIALS, 2018, 30 (26)
  • [32] High Efficient Inverted Polymer Solar Cells with Solution-Processed Electron Transport Layer
    Sanchez, Jose G.
    Balderrama, Victor S.
    Estrada, Magali
    Pallares, Josep
    Marsal, Lluis F.
    2019 LATIN AMERICAN ELECTRON DEVICES CONFERENCE (LAEDC), 2019, : 50 - 52
  • [33] High efficiency inverted polymer solar cells with solution-processed ZnO buffer layer
    Pasquale Morvillo
    Rosita Diana
    Rosa Ricciardi
    Eugenia Bobeico
    Carla Minarini
    Journal of Sol-Gel Science and Technology, 2015, 73 : 550 - 556
  • [34] Tailoring PEDOT:PSS polymer electrode for solution-processed inverted organic solar cells
    Kim, Da Hyun
    Lee, Dong Jae
    Kim, Bongjun
    Yun, Changhun
    Kang, Moon Hee
    SOLID-STATE ELECTRONICS, 2020, 169
  • [35] High-efficiency inverted polymer solar cells with solution-processed metal oxides
    Lin, Yu-Hong
    Yang, Po-Ching
    Huang, Jing-Shun
    Huang, Guo-Dong
    Wang, Ing-Jye
    Wu, Wen-Hao
    Lin, Ming-Yi
    Su, Wei-Fang
    Lin, Ching-Fuh
    SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (08) : 2511 - 2515
  • [36] High efficiency inverted polymer solar cells with solution-processed ZnO buffer layer
    Morvillo, Pasquale
    Diana, Rosita
    Ricciardi, Rosa
    Bobeico, Eugenia
    Minarini, Carla
    JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2015, 73 (03) : 550 - 556
  • [37] Graphene Oxide:Single-Walled Carbon Nanotube-Based Interfacial Layer for All-Solution-Processed Multijunction Solar Cells in Both Regular and Inverted Geometries
    Tung, Vincent C.
    Kim, Jaemyung
    Huang, Jiaxing
    ADVANCED ENERGY MATERIALS, 2012, 2 (03) : 299 - 303
  • [38] All-solution-processed flexible semitransparent organic solar cells based on sprayed silver nanowire composites as top electrodes
    Liu, He
    Yi, Xueting
    Wu, Jiang
    Li, Youzhan
    Tang, Hao
    Li, Zhanguo
    Fu, Yingying
    Xie, Zhiyuan
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2024, 173
  • [39] Low-Temperature All-Solution-Processed Transparent Silver Nanowire-Polymer/AZO Nanoparticles Composite Electrodes for Efficient ITO-Free Polymer Solar Cells
    Zhang, Xiaoqin
    Wu, Jiang
    Wang, Jiantai
    Yang, Qingqing
    Zhang, Baohua
    Xie, Zhiyuan
    ACS APPLIED MATERIALS & INTERFACES, 2016, 8 (50) : 34630 - 34637
  • [40] Solution-Processed Semitransparent Inverted Organic Solar Cells from a Transparent Conductive Polymer Electrode
    Lee, Dong Jae
    Heo, Dong Kyo
    Yun, Changhun
    Kim, Yong Hyun
    Kang, Moon Hee
    ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2019, 8 (02) : Q32 - Q37