All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide

被引:36
|
作者
Hsiao, Yu-Sheng [1 ]
Chen, Chih-Ping [2 ]
Chao, Ching-Hsun [3 ]
Whang, Wha-Tzong [1 ]
机构
[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
[2] Ind Technol Res Inst, Mat & Chem Res Labs, Hsinchu 300, Taiwan
[3] Mingdao Univ, Dept Mat Sci & Engn, Changhua, Taiwan
关键词
All-solution-process; Inverted polymer solar cells; PEDOT/PSS; SULFONATE) FILM; WORK FUNCTION; THIN-FILMS; CONDUCTIVITY; METALLIZATION; ENHANCEMENT; MECHANISM; LAYER; OXIDE;
D O I
10.1016/j.orgel.2009.01.012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we prepared all-solution-processed inverted polymer solar cells (PSCs) incorporating two solution-processed electrodes-surface-nickelized polyimide films (NiPI films) as cathodes and high-conductivity poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) films as anodes-and an active layer with a bulk heterojunction morphology of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-buytyric acid methyl ester (PCBM). The granular Ni thin films, which exhibited good adhesion and high-conductivity (ca. 2778 S cm(-1)) on the polyimide (PI) substrates and possessed a work function different from that of pure Ni metal (WF, 5.4 eV). Using ultraviolet photoelectron spectroscopy, we determined that the WF of the NiPI films was ca. 3.9 eV. Prior to the coating of the photoactive layer, the surface of the NiPI films were treated with titanium(diisopropoxide)bis(2,4-pentanedionate) (TIPD) solution to facilitate the deposition of high-quality active layer and further as a hole blocking layer. The solution processed anodes (solvent-modified PEDOT:PSS films) were further coated and subjected to mild oxygen plasma treatment on the active layer. Short exposure (5 s) to the plasma improved the quality of the surface of the active layer for PEDOT:PSS deposition. These inverted PSCs on flexible granular NiPI films provided a power conversion efficiency of 2.4% when illuminated under AM 1.5 conditions (100 mW cm(-2)). The phenomenon of light absorption enhancement in those inverted PSCs was observed as indicated in reflective UV-vis, haze factor and external quantum efficiency (EQE) responses. The resulting fill factor (FF) of 0.43 is still significantly lower than the FF of 0.64 for standard devices. When compared to the planar structure, the improvement of absorbance of light and good haze factors was obtained for granular structure which suggests NiPI as a better back contact electrode through enhancing the light trapping and scattering in inverted PSCs. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:551 / 561
页数:11
相关论文
共 50 条
  • [11] Flexible all-solution-processed all-plastic multijunction solar cells for powering electronic devices
    Tong, Jinhui
    Xiong, Sixing
    Zhou, Yifeng
    Mao, Lin
    Min, Xue
    Li, Zaifang
    Jiang, Fangyuan
    Meng, Wei
    Qin, Fei
    Liu, Tiefeng
    Ge, Ru
    Fuentes-Hernandez, Canek
    Kippelen, Bernard
    Zhou, Yinhua
    MATERIALS HORIZONS, 2016, 3 (05) : 452 - 459
  • [12] All-solution-processed small-molecule solar cells by stripping-transfer method
    Zhichun Zhai
    Meifeng Xu
    Journal of Materials Science: Materials in Electronics, 2020, 31 : 5789 - 5793
  • [13] All-solution-processed small-molecule solar cells by stripping-transfer method
    Zhai, Zhichun
    Xu, Meifeng
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2020, 31 (07) : 5789 - 5793
  • [14] The Performance Shift due to Light Irradiation on the Electrode of an All-Solution-Processed Semitransparent Polymer Solar Cell
    Chen, Lijia
    Zhou, Dachen
    Yao, Yanqing
    Niu, Lianbin
    Song, Qunliang
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2022, 219 (14):
  • [15] All-solution-processed multilayer polymer/dendrimer light emitting diodes
    Auer-Berger, Manuel
    Trattnig, Roman
    Qin, Tianshi
    Schlesinger, Raphael
    Nardi, Marco V.
    Ligorio, Giovanni
    Christodoulou, Christos
    Koch, Norbert
    Baumgarten, Martin
    Muellen, Klaus
    List-Kratochvil, Emil J. W.
    ORGANIC ELECTRONICS, 2016, 35 : 164 - 170
  • [16] All-Solution-Processed Random Si Nanopyramids for Excellent Light Trapping in Ultrathin Solar Cells
    Zhong, Sihua
    Wang, Wenjie
    Zhuang, Yufeng
    Huang, Zengguang
    Shen, Wenzhong
    ADVANCED FUNCTIONAL MATERIALS, 2016, 26 (26) : 4768 - 4777
  • [17] All-Solution-Processed Inverted Quantum-Dot Light-Emitting Diodes
    Castan, Alice
    Kim, Hyo-Min
    Jang, Jin
    ACS APPLIED MATERIALS & INTERFACES, 2014, 6 (04) : 2508 - 2515
  • [18] All-Solution-Processed, Ambient Method for ITO-Free, Roll-Coated Tandem Polymer Solar Cells using Solution-Processed Metal Films
    Angmo, Dechan
    Dam, Henrik F.
    Andersen, Thomas R.
    Zawacka, Natalia K.
    Madsen, Morten V.
    Stubager, Jorgen
    Livi, Francesco
    Gupta, Ritu
    Helgesen, Martin
    Carle, Jon E.
    Larsen-Olsen, Thue T.
    Kulkarni, Giridhar U.
    Bundgaard, Eva
    Krebs, Frederik C.
    ENERGY TECHNOLOGY, 2014, 2 (07) : 651 - 659
  • [19] In Situ Doping of the PEDOT Top Electrode for All-Solution-Processed Semitransparent Organic Solar Cells
    Ki, Taeyoon
    Jang, Chelim
    Jin, Jong Sung
    Kim, Jehan
    Kim, Nara
    Moon, Heehun
    Jang, Soo-Young
    Kwon, Sooncheol
    Jang, Jubin
    Kang, Hongkyu
    Lee, Kwanghee
    ACS APPLIED MATERIALS & INTERFACES, 2023, 15 (40) : 47317 - 47326
  • [20] Inverted polymer solar cells with a solution-processed cesium halide interlayer
    Xiao, Teng
    Cui, Weipan
    Cai, Min
    Leung, Wai
    Anderegg, James W.
    Shinar, Joseph
    Shinar, Ruth
    ORGANIC ELECTRONICS, 2013, 14 (01) : 267 - 272