All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide

被引:36
作者
Hsiao, Yu-Sheng [1 ]
Chen, Chih-Ping [2 ]
Chao, Ching-Hsun [3 ]
Whang, Wha-Tzong [1 ]
机构
[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
[2] Ind Technol Res Inst, Mat & Chem Res Labs, Hsinchu 300, Taiwan
[3] Mingdao Univ, Dept Mat Sci & Engn, Changhua, Taiwan
关键词
All-solution-process; Inverted polymer solar cells; PEDOT/PSS; SULFONATE) FILM; WORK FUNCTION; THIN-FILMS; CONDUCTIVITY; METALLIZATION; ENHANCEMENT; MECHANISM; LAYER; OXIDE;
D O I
10.1016/j.orgel.2009.01.012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we prepared all-solution-processed inverted polymer solar cells (PSCs) incorporating two solution-processed electrodes-surface-nickelized polyimide films (NiPI films) as cathodes and high-conductivity poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) films as anodes-and an active layer with a bulk heterojunction morphology of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-buytyric acid methyl ester (PCBM). The granular Ni thin films, which exhibited good adhesion and high-conductivity (ca. 2778 S cm(-1)) on the polyimide (PI) substrates and possessed a work function different from that of pure Ni metal (WF, 5.4 eV). Using ultraviolet photoelectron spectroscopy, we determined that the WF of the NiPI films was ca. 3.9 eV. Prior to the coating of the photoactive layer, the surface of the NiPI films were treated with titanium(diisopropoxide)bis(2,4-pentanedionate) (TIPD) solution to facilitate the deposition of high-quality active layer and further as a hole blocking layer. The solution processed anodes (solvent-modified PEDOT:PSS films) were further coated and subjected to mild oxygen plasma treatment on the active layer. Short exposure (5 s) to the plasma improved the quality of the surface of the active layer for PEDOT:PSS deposition. These inverted PSCs on flexible granular NiPI films provided a power conversion efficiency of 2.4% when illuminated under AM 1.5 conditions (100 mW cm(-2)). The phenomenon of light absorption enhancement in those inverted PSCs was observed as indicated in reflective UV-vis, haze factor and external quantum efficiency (EQE) responses. The resulting fill factor (FF) of 0.43 is still significantly lower than the FF of 0.64 for standard devices. When compared to the planar structure, the improvement of absorbance of light and good haze factors was obtained for granular structure which suggests NiPI as a better back contact electrode through enhancing the light trapping and scattering in inverted PSCs. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:551 / 561
页数:11
相关论文
共 48 条
  • [21] Analysis of the failure mechanism for a stable organic photovoltaic during 10000 h of testing
    Krebs, Frederik C.
    Norrman, Kion
    [J]. PROGRESS IN PHOTOVOLTAICS, 2007, 15 (08): : 697 - 712
  • [22] Solution-processed metal nanowire mesh transparent electrodes
    Lee, Jung-Yong
    Connor, Stephen T.
    Cui, Yi
    Peumans, Peter
    [J]. NANO LETTERS, 2008, 8 (02) : 689 - 692
  • [23] Efficient inverted polymer solar cells
    Li, G.
    Chu, C. -W.
    Shrotriya, V.
    Huang, J.
    Yang, Y.
    [J]. APPLIED PHYSICS LETTERS, 2006, 88 (25)
  • [24] Manipulating regioregular poly(3-hexylthiophene):: [6,6]-phenyl-C61-butyric acid methyl ester blends -: route towards high efficiency polymer solar cells
    Li, Gang
    Shrotriya, Vishal
    Yao, Yan
    Huang, Jinsong
    Yang, Yang
    [J]. JOURNAL OF MATERIALS CHEMISTRY, 2007, 17 (30) : 3126 - 3140
  • [25] Highly efficient inverted polymer solar cell by low temperature annealing of Cs2CO3 interlayer
    Liao, Hua-Hsien
    Chen, Li-Min
    Xu, Zheng
    Li, Gang
    Yang, Yang
    [J]. APPLIED PHYSICS LETTERS, 2008, 92 (17)
  • [26] Hydroxylated secondary dopants for surface resistance enhancement in transparent poly(3,4-ethylenedioxythiophene)poly(styrenesulfonate) thin films
    Martin, BD
    Nikolov, N
    Pollack, SK
    Saprigin, A
    Shashidhar, R
    Zhang, F
    Heiney, PA
    [J]. SYNTHETIC METALS, 2004, 142 (1-3) : 187 - 193
  • [27] Direct metallization of nickel on polymeric template patterns for fabrication of copper circuits on glass substrates
    Matsumura, Yasufumi
    Enomoto, Yasushi
    Sugiyama, Masanori
    Akamatsu, Kensuke
    Nawafune, Hidemi
    [J]. JOURNAL OF MATERIALS CHEMISTRY, 2008, 18 (42) : 5078 - 5082
  • [28] Modeling the short-circuit current density of polymer solar cells based on P3HT:PCBM blend
    Monestier, Florent
    Simon, Jean-Jacques
    Torchio, Philippe
    Escoubas, Ludovic
    Florya, Francois
    Bailly, Sandrine
    de Bettignies, Remi
    Guillerez, Stephane
    Defranoux, Christophe
    [J]. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2007, 91 (05) : 405 - 410
  • [29] Na S.I., 2008, Advanced Materials, V20, P1
  • [30] Conductivity, work function, and environmental stability of PEDOT:PSS thin films treated with sorbitol
    Nardes, A. M.
    Kemerink, M.
    de Kok, M. M.
    Vinken, E.
    Maturova, K.
    Janssen, R. A. J.
    [J]. ORGANIC ELECTRONICS, 2008, 9 (05) : 727 - 734