All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide

被引:36
作者
Hsiao, Yu-Sheng [1 ]
Chen, Chih-Ping [2 ]
Chao, Ching-Hsun [3 ]
Whang, Wha-Tzong [1 ]
机构
[1] Natl Chiao Tung Univ, Dept Mat Sci & Engn, Hsinchu 300, Taiwan
[2] Ind Technol Res Inst, Mat & Chem Res Labs, Hsinchu 300, Taiwan
[3] Mingdao Univ, Dept Mat Sci & Engn, Changhua, Taiwan
关键词
All-solution-process; Inverted polymer solar cells; PEDOT/PSS; SULFONATE) FILM; WORK FUNCTION; THIN-FILMS; CONDUCTIVITY; METALLIZATION; ENHANCEMENT; MECHANISM; LAYER; OXIDE;
D O I
10.1016/j.orgel.2009.01.012
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, we prepared all-solution-processed inverted polymer solar cells (PSCs) incorporating two solution-processed electrodes-surface-nickelized polyimide films (NiPI films) as cathodes and high-conductivity poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) films as anodes-and an active layer with a bulk heterojunction morphology of poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-buytyric acid methyl ester (PCBM). The granular Ni thin films, which exhibited good adhesion and high-conductivity (ca. 2778 S cm(-1)) on the polyimide (PI) substrates and possessed a work function different from that of pure Ni metal (WF, 5.4 eV). Using ultraviolet photoelectron spectroscopy, we determined that the WF of the NiPI films was ca. 3.9 eV. Prior to the coating of the photoactive layer, the surface of the NiPI films were treated with titanium(diisopropoxide)bis(2,4-pentanedionate) (TIPD) solution to facilitate the deposition of high-quality active layer and further as a hole blocking layer. The solution processed anodes (solvent-modified PEDOT:PSS films) were further coated and subjected to mild oxygen plasma treatment on the active layer. Short exposure (5 s) to the plasma improved the quality of the surface of the active layer for PEDOT:PSS deposition. These inverted PSCs on flexible granular NiPI films provided a power conversion efficiency of 2.4% when illuminated under AM 1.5 conditions (100 mW cm(-2)). The phenomenon of light absorption enhancement in those inverted PSCs was observed as indicated in reflective UV-vis, haze factor and external quantum efficiency (EQE) responses. The resulting fill factor (FF) of 0.43 is still significantly lower than the FF of 0.64 for standard devices. When compared to the planar structure, the improvement of absorbance of light and good haze factors was obtained for granular structure which suggests NiPI as a better back contact electrode through enhancing the light trapping and scattering in inverted PSCs. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码:551 / 561
页数:11
相关论文
共 48 条
  • [11] High efficiency flexible ITO-free polymer/fullerene photodiodes
    Huang, J.
    Wang, X.
    Kim, Y.
    deMello, A. J.
    Bradley, D. D. C.
    deMello, J. C.
    [J]. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, 2006, 8 (33) : 3904 - 3908
  • [12] Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of poly (3,4-ethylenedioxythiophene)/poly (styrene sulfonate) films
    Huang, JS
    Miller, PF
    Wilson, JS
    de Mello, AJ
    de Mello, JC
    Bradley, DDC
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2005, 15 (02) : 290 - 296
  • [13] Copper/polyimide heterojunctions: Controlling interfacial structures through an additive-based, all-wet chemical process using ion-doped precursors
    Ikeda, Shingo
    Yanagimoto, Hiroshi
    Akamatsu, Kensuke
    Nawafune, Hidemi
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2007, 17 (06) : 889 - 897
  • [14] p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells
    Irwin, Michael D.
    Buchholz, Bruce
    Hains, Alexander W.
    Chang, Robert P. H.
    Marks, Tobin J.
    [J]. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 2008, 105 (08) : 2783 - 2787
  • [15] JONSSON SKM, 2003, SYNTHETIC MET, P1
  • [16] Charge carrier trapping in organic solar cell structures P3HT:PCBM
    Kazukauskas, V.
    Pranaitis, M.
    Kajzar, F.
    Glatthaar, M.
    Hinsch, A.
    [J]. MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 2008, 484 : 739 - 747
  • [17] The surface engineering of top electrode in inverted polymer bulk-heterojunction solar cells
    Kim, Jihwan
    Khang, Dahl-Young
    Kim, Ju-Hyung
    Lee, Hong H.
    [J]. APPLIED PHYSICS LETTERS, 2008, 92 (13)
  • [18] Efficient tandem polymer solar cells fabricated by all-solution processing
    Kim, Jin Young
    Lee, Kwanghee
    Coates, Nelson E.
    Moses, Daniel
    Nguyen, Thuc-Quyen
    Dante, Mark
    Heeger, Alan J.
    [J]. SCIENCE, 2007, 317 (5835) : 222 - 225
  • [19] New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer
    Kim, JY
    Kim, SH
    Lee, HH
    Lee, K
    Ma, WL
    Gong, X
    Heeger, AJ
    [J]. ADVANCED MATERIALS, 2006, 18 (05) : 572 - +
  • [20] Efficient polymer solar cells fabricated by simple brush painting
    Kim, Seok-Soon
    Na, Seok-In
    Jo, Jang
    Tae, Giyoong
    Kim, Dong-Yu
    [J]. ADVANCED MATERIALS, 2007, 19 (24) : 4410 - +