Effect of mean stress (stress ratio) and aging on fatigue-crack growth in a metastable beta titanium alloy, Ti-10V-2Fe-3Al

被引:47
作者
Jha, SK [1 ]
Ravichandran, KS [1 ]
机构
[1] Univ Utah, Dept Met Engn, Salt Lake City, UT 84112 USA
来源
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2000年 / 31卷 / 03期
关键词
D O I
10.1007/s11661-000-0012-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of mean stress, or the stress ratio (R), on the fatigue-crack growth (FCG) behavior of alpha-aged and crt-aged microstructures of the beta titanium alloy Ti-10V-2Fe-3Al was investigated. While the mean stress had a negligible effect on the FCG behavior of the alpha-aged microstructure, a strong effect was observed in the alpha-aged microstructure. In particular, the values of the threshold stress-intensity range (Delta K-th) exhibited a strong dependence on R in the omega-aged microstructure, while this dependence was weak in the ru-aged microstructure. These effects seem to arise primarily from fracture-surface roughness-induced crack closure. The crack closure levels for the alpha-aged microstructure were found to be very low compared to those for the omega-aged microstructure. Transmission electron microscopy and scanning electron microscopy studies of microstructures and fracture surfaces were performed to gain insight into the deformation characteristics and crack propagation mechanisms, respectively, in these microstructures. The microstructure-induced differences in FCG behavior are rationalized in terms of the effect of aging on slip and crack closure.
引用
收藏
页码:703 / 714
页数:12
相关论文
共 37 条
[1]  
*ASTM, 1993, ANN BOOK ASTM STAND, P679
[2]   PROCESSING PROPERTIES RELATIONSHIPS OF TI-10V-2FE-3AL [J].
BOYER, RR ;
KUHLMAN, GW .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1987, 18 (12) :2095-2103
[3]   DESIGN PROPERTIES OF A HIGH-STRENGTH TITANIUM-ALLOY, TI-10V-2FE-3AL [J].
BOYER, RR .
JOURNAL OF METALS, 1980, 32 (03) :61-65
[4]  
BUCCI RJ, 1972, J MATER, V7, P402
[5]  
CAMPAGNAC MH, 1986, P INT C I MET, P261
[6]   PRACTICAL CONSIDERATIONS FOR MANUFACTURING HIGH-STRENGTH TI-10V-2FE-3AL ALLOY FORGINGS [J].
CHEN, CC ;
BOYER, RR .
JOURNAL OF METALS, 1979, 31 (07) :33-39
[7]   OMEGA PHASE TRANSFORMATION IN TITANIUM ALLOYS AS AN EXAMPLE OF DISPLACEMENT CONTROLLED REACTIONS [J].
DEFONTAINE, D ;
PATON, NE ;
WILLIAMS, JC .
ACTA METALLURGICA, 1971, 19 (11) :1153-+
[8]  
DeHoff RT., 1968, QUANTITATIVE MICROSC, P45
[9]   An investigation of the effects of stress ratio and crack closure on the micromechanisms of fatigue crack growth in Ti-6Al-4V [J].
Dubey, S ;
Soboyejo, ABO ;
Soboyejo, WO .
ACTA MATERIALIA, 1997, 45 (07) :2777-2787
[10]   MICROSTRUCTURAL INFLUENCES ON FATIGUE CRACK-PROPAGATION IN TI-10V-2FE-3AL [J].
DUERIG, TW ;
ALLISON, JE ;
WILLIAMS, JC .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1985, 16 (05) :739-751