Properties of stainless-steel surface after hollow cathode assisted plasma nitriding

被引：7
作者：
Zhang, Zhehao [1 ]
Bi, Yongjie [2 ]
Zhang, Minyi [1 ]
Li, Yang [2 ]
Zhao, Fushuai [2 ]
Zhang, Shangzhou [2 ]
He, Yongyong [1 ]
机构：
[1] Tsinghua Univ, State Key Lab Tribol, Beijing 100084, Peoples R China
[2] Yantai Univ, Dept Nucl Equipment, Yantai 264005, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2020年 / 7卷 / 11期
关键词：
austenitic stainless steel; plasma nitriding; corrosion resistance; hollow cathode effect; CORROSION PROPERTIES; NITROGEN; SCREEN; LAYERS; MICROSTRUCTURE; IMPLANTATION; RESISTANCE; MORPHOLOGY; DIFFUSION; HARDNESS;
D O I：
10.1088/2053-1591/abcbb7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
AISI 304 stainless steel was nitrided at different temperature in the plasma equipment using a new auxiliary device. The proposed hollow cathode auxiliary device improves the plasma density, thereby accelerating the nitriding process. The modified surface was characterized by x-ray diffraction, scanning and transmission electron microscopies, atomic force microscopy, surface microhardness testing. Electrochemical corrosion test was used to measure the localized corrosion resistance of the samples. Single S-phase layer without the CrN precipitation was obtained by hollow cathode plasma nitriding at 450 degrees C, which improved the microhardness, wear and corrosion resistance of the steel surface. Nitriding at higher temperature of 550 degrees C resulted in substitution of the S-phase towards layer composed from CrN and alpha-Fe phases, improving the microhardness but decreasing the corrosion resistance.
引用
收藏
页数：11
相关论文
共 43 条
  • [41] Structural characteristics of low-temperature plasma-nitrided layers on AISI 304 stainless steel with an α′-martensite layer
    Yu, ZW
    Xu, XL
    Wang, L
    Qiang, JB
    Hei, ZK
    [J]. SURFACE & COATINGS TECHNOLOGY, 2002, 153 (2-3) : 125 - 130
  • [42] Study on microstructural and tribological properties of sulphonitrocarburized layers diffused by hollow cathode discharging
    Zhang, Minyi
    Chen, Jinhua
    Li, Yang
    Chen, Guangyan
    He, Yongyong
    Luo, Jianbin
    [J]. VACUUM, 2020, 174
  • [43] Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods
    Zhecheva, A
    Sha, W
    Malinov, S
    Long, A
    [J]. SURFACE & COATINGS TECHNOLOGY, 2005, 200 (07) : 2192 - 2207
12345