Effect of C and Cr in chosen alloys Fe-Cr-C on the matrix and carbides abrasive wear

被引：0
作者：
Drotlew, A
机构：
来源：
EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES | 1997年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the chemical composition of alloys abrasive wear at 450 degrees C has been analysed. Total wear has been divided into volume loss of matrix and volume loss of carbides. The Bitter's theory has been used to describe the wear as a function of a glancing angle of abrasive material. It has been stated that the most effective control of wear resistance is possible by changing of C content. Carbon acts upon the matrix as well as upon the carbides in the same direction. An increase of Cr content causes an increase of matrix wear and levels down simultaneous decrease of wear of carbides what makes the use of this component to control the material wear unjustifiable.
引用
收藏
页码：63 / 66
页数：4
相关论文
共 50 条
[41]   The Role of Distribution Forms of Fe-Cr-C Cladding Layer in the Impact Abrasive Wear Performance of Hadfield Steel [J].
Pan, Zhang ;
Dong, Xuanpu ;
Cao, Huatang ;
Huang, Qiwen .
MATERIALS, 2020, 13 (08)
[42]   In-situ observation of growth characteristics of M7C3 carbides in hypoeutectic Fe-Cr-C alloys [J].
Li, Leiji ;
Li, Wanming ;
Zhang, Bo ;
Wang, Bin ;
Zang, Ximin .
Materials Characterization, 2022, 191
[43]   Microstructural and abrasive characteristics of high carbon Fe-Cr-C hardfacing alloy [J].
Chang, Chia-Ming ;
Chen, Yen-Chun ;
Wu, Weite .
TRIBOLOGY INTERNATIONAL, 2010, 43 (5-6) :929-934
[44]   Tribological performance under abrasive wear of Fe-Cr-C plus Nb coating deposited by FCAW process [J].
Sousa, Jurandir Marcos Sa de ;
Gil, Gilson Silva ;
Barbosa, Matheus dos Santos ;
Garcia, Douglas Neves ;
Lobato, Mauro Quaresma ;
Machado, Paulo Cordeiro .
WEAR, 2023, 523
[45]   Microstructure and abrasive wear resistance evolution of water and liquid nitrogen forced cooling Fe-Cr-C deposit [J].
Zhang, Jingli ;
Wei, Jianjun ;
Wei, Shizhong ;
Huang, Zhiquan ;
Wei, Wei ;
Xu, Liujie .
TRIBOLOGY INTERNATIONAL, 2022, 174
[46]   The effect of Cr on the microstructure and wear resistance of Fe-Cr-V-C hardfacing alloys [J].
Zong, Lin ;
Liu, Zhengjun .
ADVANCED MATERIALS, PTS 1-4, 2011, 239-242 :1203-+
[47]   Effect of the Initial Microstructure on Defect Evolution in Neutron Irradiated Fe-Cr-C Alloys [J].
Brodziansky, T. ;
Slugen, V. ;
Sojak, S. ;
Petriska, M. ;
Konstantinovic, M. J. .
ACTA PHYSICA POLONICA A, 2017, 132 (05) :1590-1592
[48]   Erosion of ferritic Fe-Cr-C cast alloys at elevated temperatures [J].
Drotlew, A ;
Christodoulou, P ;
Gutowski, V .
WEAR, 1997, 211 (01) :120-128
[49]   METASTABLE AUSTENITE PHASE IN RAPIDLY QUENCHED FE-CR-C ALLOYS [J].
MINEMURA, T ;
INOUE, A ;
MASUMOTO, T .
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1981, 21 (09) :649-655
[50]   Carbon Distribution in Ferritic-Martensitic Fe-Cr-C Alloys [J].
Konstantinovic, Milan Jovan ;
Minov, Boris ;
Van Renterghem, Wouter .
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2018, 21
12345