Effect of C and Cr in chosen alloys Fe-Cr-C on the matrix and carbides abrasive wear

被引：0
作者：
Drotlew, A
机构：
来源：
EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1: METALS AND COMPOSITES | 1997年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The influence of the chemical composition of alloys abrasive wear at 450 degrees C has been analysed. Total wear has been divided into volume loss of matrix and volume loss of carbides. The Bitter's theory has been used to describe the wear as a function of a glancing angle of abrasive material. It has been stated that the most effective control of wear resistance is possible by changing of C content. Carbon acts upon the matrix as well as upon the carbides in the same direction. An increase of Cr content causes an increase of matrix wear and levels down simultaneous decrease of wear of carbides what makes the use of this component to control the material wear unjustifiable.
引用
收藏
页码：63 / 66
页数：4
相关论文
共 50 条
[31]   Metallurgical and Tribological Evaluation of Fe-Cr-C Hardfacing Alloys [J].
Pawar S. ;
Mukhopadhyay G. .
Journal of Failure Analysis and Prevention, 2018, 18 (04) :868-876
[32]   Effect of carbide volume fraction on the oxidation of austenitic Fe-Cr-C alloys [J].
Susanto, L. B. ;
Young, D. J. .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2006, 57 (06) :467-475
[33]   Effect of mechanical stirring on microstructure and wear behavior of Fe-Cr-C system open arc hardfacing alloys [J].
Xu, Fa-Hong ;
Liu, Hong-Xi ;
Zhang, Xiao-Wei ;
Jiang, Ye-Hua .
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (07) :210-216
[34]   INFLUENCE OF CARBON ON VISCOSITY OF LIQUID FE-CR-C ALLOYS [J].
BAUM, BA ;
GELD, PV ;
KOCHEROV, PV .
RUSSIAN METALLURGY-METALLY-USSR, 1967, (05) :27-&
[35]   Tribological properties of laser processed Fe-Cr-C alloys [J].
Colaço, R ;
Vilar, R .
MATERIALS SCIENCE, TESTING AND INFORMATICS II, 2005, 473-474 :53-58
[36]   Magnetic properties of Fe-Cr-C and FeCr-C-Ni alloys [J].
Yokoyama, S ;
Inui, T .
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2002, 88 (04) :222-228
[37]   Effect of Molybdenum on Metallurgical and Wear Properties of Fe-Cr-C Hard facing alloy [J].
Saadat, Abbas ;
Shiran, Mohammadreza Khanzadeh Gharah ;
Amini, Kamran ;
Bakhtiari, Hamid ;
Samimi, Behrad .
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES, 2019, 55 (05) :942-950
[38]   STRUCTURE AND MECHANICAL-PROPERTIES OF UNIDIRECTIONALLY SOLIDIFIED FE-CR-C AND FE-CR-X-C ALLOYS [J].
FRAS, E ;
GUZIK, E ;
LOPEZ, HF .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (05) :1235-1241
[39]   Effect of titanium content on microstructure and wear resistance of Fe-Cr-C hardfacing layers [J].
Zhou, Y.F. ;
Yang, Y.L. ;
Li, D. ;
Yang, J. ;
Jiang, Y.W. ;
Ren, X.J. ;
Yang, Q.X. .
Welding Journal, 2012, 91 (08)
[40]   In-situ observation of growth characteristics of M7C3 carbides in hypoeutectic Fe-Cr-C alloys [J].
Li, Leiji ;
Li, Wanming ;
Zhang, Bo ;
Wang, Bin ;
Zang, Ximin .
MATERIALS CHARACTERIZATION, 2022, 191
12345