Performance of plastic gear made of carbon fiber reinforced polyether-ether-ketone

被引：55

作者：

Kurokawa, M

Uchiyama, Y

Nagai, S

机构：

[1] Kanazawa Univ 40 20, Grad Sch Nat Sci & Technol, Kanazawa, Ishikawa 9208667, Japan

[2] Kanazawa Univ 40 20, Fac Engn, Dept Mech Syst Engn, Kanazawa, Ishikawa 9208667, Japan

[3] Starlite CO Ltd, Tribosyst Lab, Tsurumi Ku, Osaka 5380034, Japan

来源：

TRIBOLOGY INTERNATIONAL | 1999年 / 32卷 / 09期

关键词：

polymer composite; carbon fiber; PEEK; wear; spur gear;

D O I：

10.1016/S0301-679X(99)00078-X

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A carbon fiber (CF) reinforced poly-ether-ether-ketone (PEEK) gear was prepared by injection molding, and its gear performance was evaluated, It was found that the wear process of the CF reinforced PEEK gear significantly varied depending on the test conditions, such as the kind of the partner gear combined and whether a lubricant exists on the engagement region or not. It was assumed that the existence of transfer film at the engagement region, the affinity between PEEK and CF, the compression modulus as well as surface hardness of the partner gear, and the characteristics of CF play a role of differentiation in the wear depth. (C) 2000 Elsevier Science Ltd. All rights reserved.

引用

页码：491 / 497

页数：7

共 9 条

[1]

CHEN JH, 1981, ASME, V103, P543

[2]

GAUVIN R, 1980, 80C2DET108 ASME, P1

[3]

Hachmann H., 1966, KONSTRUKTION, V3, P81

[4]

TSUKAMOTO N, 1993, T JPN SOC MECH ENG, V59, P238