Design and experimental verification of a bi-directional nonlinear piezoelectric energy harvester

被引:80
作者
Fan, Kang-Qi [1 ]
Chao, Feng-Bo [1 ]
Zhang, Jian-Guo [2 ]
Wang, Wei-Dong [1 ]
Che, Xiao-Huan [1 ]
机构
[1] Xidian Univ, Sch Mechanoelect Engn, Xian 710071, Peoples R China
[2] Wuhan Mech Coll, Wuhan 430075, Peoples R China
基金
中国国家自然科学基金;
关键词
Piezoelectric conversion; Energy harvesting; Magnetic coupling; Bi-directional vibration; POWER-GENERATION; VIBRATION;
D O I
10.1016/j.enconman.2014.06.021
中图分类号
O414.1 [热力学];
学科分类号
摘要
Harvesting energy from ambient vibrations via piezoelectric effect has been considered as a promising solution for implementing self-sustained low-power electronic devices. Most of the proposed piezoelectric energy harvesters (PEHs) are focused on the energy harvesting from uni-directional vibration. This is a strong limitation because the vibration may come from various directions in practical applications. To address this issue, this paper presents a design and experimental verification of a compact bi-directional nonlinear PEH that is sensitive to two orthogonal directions. This nonlinear PEH is composed of two magnetically coupled piezoelectric cantilever beams with orthogonal directions of deflection. Theoretical analysis and experiments reveal that the proposed PEH can not only harvest vibration energy from various directions but also provide an enhanced output voltage as compared to its linear counterpart. The introduction of magnetic coupling also enables the energy transfer between the two beams, which helps to restrain the excessive deflection of the two beams. Moreover, the advantage of nonlinear PEH is found to be highlighted at low-level excitation, whereas the resonant frequency of the nonlinear PEH drops as the excitation level reduces. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:561 / 567
页数:7
相关论文
共 39 条
[1]   Analysis of two dimensional, wide-band, bistable vibration energy harvester [J].
Ando, B. ;
Baglio, S. ;
Maiorca, F. ;
Trigona, C. .
SENSORS AND ACTUATORS A-PHYSICAL, 2013, 202 :176-182
[2]  
Audo B, 2010, J MICROMECH MICROENG, V20
[3]   Optimization of an electret-based energy harvester [J].
Boisseau, S. ;
Despesse, G. ;
Sylvestre, A. .
SMART MATERIALS AND STRUCTURES, 2010, 19 (07)
[4]   Towards an autonomous self-tuning vibration energy harvesting device for wireless sensor network applications [J].
Challa, Vinod R. ;
Prasad, M. G. ;
Fisher, Frank T. .
SMART MATERIALS & STRUCTURES, 2011, 20 (02)
[5]   Nonlinear Energy Harvesting [J].
Cottone, F. ;
Vocca, H. ;
Gammaitoni, L. .
PHYSICAL REVIEW LETTERS, 2009, 102 (08)
[6]   A smart and self-sufficient frequency tunable vibration energy harvester [J].
Eichhorn, C. ;
Tchagsim, R. ;
Wilhelm, N. ;
Woias, P. .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (10)
[7]   Modeling and experimental verification of multi-modal vibration energy harvesting from plate structures [J].
El-Hebeary, Mohamed M. R. ;
Arafa, Mustafa H. ;
Megahed, Said M. .
SENSORS AND ACTUATORS A-PHYSICAL, 2013, 193 :35-47
[8]   Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical coupling [J].
Erturk, A. ;
Inman, D. J. .
JOURNAL OF SOUND AND VIBRATION, 2011, 330 (10) :2339-2353
[9]   A piezomagnetoelastic structure for broadband vibration energy harvesting [J].
Erturk, A. ;
Hoffmann, J. ;
Inman, D. J. .
APPLIED PHYSICS LETTERS, 2009, 94 (25)
[10]   Modeling of Piezoelectric Energy Harvesting from an L-shaped Beam-mass Structure with an Application to UAVs [J].
Erturk, Alper ;
Renno, Jamil M. ;
Inman, Daniel J. .
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2009, 20 (05) :529-544