Recovery process of neutron-irradiated vanadium alloys in post-irradiation annealing treatment

Experiments to determine the influence of post-irradiation annealing on the mechanical properties and microstructures of neutron-irradiated V-4Cr-4Ti alloys were conducted. Two groups of specimens (as-irradiated specimens and specimens which underwent the post-irradiation annealing treatment) were subjected to tensile tests at room temperature and 773 K. Post-irradiation annealing experiments carried out over periods of up to 50 h were used to restore strength and ductility. As annealing time was extended, ductility was recovered up to 5% at 50 h anneal; however irradiation hardening was not recovered completely. Microstructural changes due to post-irradiation annealing corresponded to the amount that yield stress increased in tensile behavior in the irradiated specimen. The recovery in ductility was likely caused by the dissolution of interstitial impurities from defect clusters and dislocation cores produced by neutron irradiation during post-irradiation anneal treatment. A 3% elongation recovery in V-4Cr-4Ti alloys was achieved by annealing at 773 K for 20 h in a vacuum for neutron-irradiated samples at low temperature. (C) 2013 Elsevier B.V. All rights reserved.