Mesophilic, thermophilic and hyperthermophilic acidogenic fermentation of food waste in batch: Effect of inoculum source

Distinctions in hydrolysis and acidogenesis were examined for a series of anaerobic batch reactors inoculated with three different anaerobic mixed cultures (mesophilic, thermophilic and hyperthermophilic anaerobic sludge) and operated at the temperature of inoculum's origin and additionally at 70 degrees C. Hyperthermophilic temperatures led to increased hydrolysis rates during the start-up stage but a rapid drop in pH limited the overall hydrolysis efficiency, indicating the importance of pH control to sustain the high reaction rates at higher temperatures. No significant difference (P> 0.05) was observed among hydrolysis efficiencies obtained for different reactors which ranged between 27 +/- 3% and 40 +/- 14%. The highest fermentation yield of 0.44 g COD of fermentation products/g VSS-CODadded was obtained under thermophilic conditions, followed by mesophilic (0.33 g COD ferm. prod./g VSS-CODadded) and hyperthermophilic conditions (0.05-0.08 g COD ferm. prod./g VSS-CODadded). Fermentative performance was better at mesophilic and thermophilic conditions as indicated by improved production of volatile fatty acids (VFA). VFAs accounted for 60-71% of the solubilised matter at thermophilic and mesophilic conditions. Acetic acid formed the primary VFA (70%) at mesophilic temperatures, while butyric acid was the major VFA at thermophilic (60%) conditions. Hyperthermophilic conditions led to increased production of lactic acid, which comprised up to 32% of the solubilised matter. Overall, the results indicate that different operating temperatures may not significantly affect the substrate degradation efficiency but clearly influence the biotransformation pathways. Crown Copyright (C) 2019 Published by Elsevier Ltd. All rights reserved.