Thermal performance of rotating two-pass ribbed square channel with wavy sidewalls

被引:2
|
作者
Chang, Shyy Woei [1 ]
Liou, Tong-Miin [2 ]
Gao, Jing Yan [3 ]
机构
[1] Natl Kaohsiung Marine Univ, Thermal Fluids Lab, Kaohsiung 81143, Taiwan
[2] Natl Tsing Hua Univ, Dept Power Mech Engn, Hsinchu, Taiwan
[3] Natl Kaohsiung Marine Univ, Dept Marine Engn, Kaohsiung 81143, Taiwan
关键词
Rotating two-pass ribbed wavy channel; Compound HTE measure; Turbine rotor blade cooling; LOCAL HEAT-TRANSFER; RECTANGULAR CHANNELS; SERPENTINE PASSAGES; ASPECT-RATIO; PIN-FINS; DUCT; BUOYANCY; FLOW; TRANSVERSE; RIBS;
D O I
10.1016/j.expthermflusci.2015.06.009
中图分类号
O414.1 [热力学];
学科分类号
摘要
Detailed Nusselt number (Nu) distributions over Leading Endwall (Le-E) and Trailing Endwall (Tr-E), Fanning friction coefficients (f) and thermal performance factors (TPF) of a radially rotating two-pass square channel enhanced by in-line 45 degrees endwall ribs and wavy sidewalls were measured at the test conditions of 5000 <= Re <= 20,000, 0 <= Ro <= 0.3 and 0 <= Bu <= 0.053. No previous study has examined the thermal performances of a rotating ribbed two-pass channel with wavy sidewalls. A selection of heat transfer data illustrates the individual and interdependent effects of Re, R0 and Bu on local and region-averaged Le-E and Tr-E Nu. A set of Le-E and Tr-E heat transfer correlations that determines the rib-wise and regionally averaged Nu over the inlet and outlet ribbed endwalls, as well as over the smooth bend endwall is generated. Along with the f data detected from the ribbed endwalls and wavy sidewalls at isothermal conditions, the TPF values at various rotating conditions are evaluated. The heat transfer, pressure drop and TPF performances for the two-pass channel with present combined passive Heat Transfer Enhancement (HTE) device at rotating conditions are subsequently compared with those generated by the typical HTE devices deployed in the internal coolant channels of a gas turbine rotor blade. Acting by the combined Re, Ro and Bu effects, present region-averaged Nusselt numbers over the rotating Le-E (Tr-E) of the inlet-leg, sharp bend and outlet-leg are respectively raised to 3.20-5.80 (4.10-8.59), 4.26-10.48(5.03-15.47) and 1.48-12.47 (4.64-8.24) times of the Dittus-Boelter reference levels. With the! coefficients increased to 9.61-25.7 times of the Blasius equation levels by present HTE measure and the 180 degrees sharp bend, present TPF values obtained at the rotating test conditions fall in the range of 2.87-0.71, suggesting the favorable heat transfer effectiveness with cooling applications to gas turbine rotator blades. (C) 2015 Elsevier Inc. All rights reserved.
引用
收藏
页码:412 / 434
页数:23
相关论文
共 50 条
  • [11] Heat transfer in rotating two-pass square duct with 45° ribbed walls under high rotation numbers
    Chen, Hao
    Deng, Hong-Wu
    Li, Yang
    Tian, Shu-Qing
    Tuijin Jishu/Journal of Propulsion Technology, 2015, 36 (09): : 1339 - 1346
  • [12] HEAT TRANSFER ENHANCEMENT BY SINUSOIDAL WAVY TAPE INSERT IN TWO-PASS RIBBED CHANNELS
    Wei, Jiang
    Mei, Ziyue
    Wu, Fan
    Hou, Youmin
    Xie, Danmei
    THERMAL SCIENCE, 2022, 26 (06): : 4657 - 4668
  • [13] Thermal performance of radially rotating two-pass S-shaped zig-zag channel
    Chang, Shyy Woei
    Wu, Pey-Shey
    Chen, Chuan-Sheng
    Weng, Chien-Chou
    Jiang, Yu-Ru
    Shih, Shih-Hao
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 : 1011 - 1031
  • [14] EXPERIMENTAL INVESTIGATION OF ROTATING RIB ROUGHENED TWO-PASS SQUARE DUCT WITH TWO DIFFERENT CHANNEL ORIENTATIONS
    Singh, Prashant
    Ekkad, Srinath V.
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 5A, 2017,
  • [15] Aerothermal performance of a rotating two-pass furrowed channel roughened by angled ribs
    Chang, Shyy Woei
    Huang, Shi-Wei
    APPLIED THERMAL ENGINEERING, 2021, 199
  • [16] DETAILED FLOW INVESTIGATION USING PIV IN A ROTATING SQUARE-SECTIONED TWO-PASS COOLING SYSTEM WITH RIBBED WALLS
    Elfert, M.
    Voges, M.
    Klinner, J.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 4, PTS A AND B, 2008, : 1039 - 1050
  • [17] Turbulent flow in a rotating two pass ribbed rectangular channel
    Hsieh, SS
    Chin, HJ
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2003, 125 (04): : 609 - 622
  • [18] Local heat transfer in a rotating two-pass ribbed triangular duct with two model orientations
    Dutta, S
    Han, JC
    Lee, CP
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1996, 39 (04) : 707 - 715
  • [19] Local heat transfer in a rotating two-pass ribbed triangular duct with two model orientations
    Texas A&M Univ, College Station, United States
    Int J Heat Mass Transfer, 4 (707-715):
  • [20] Mass-transfer distribution in rotating, two-pass, ribbed channels with vortex generators
    Eliades, V
    Nikitopoulos, DE
    Acharya, S
    JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER, 2001, 15 (03) : 266 - 274