Influence of the Intensity of a Constant Magnetic Field on the Process of Phase Formation in an Aged Aluminum Alloy Al-Si-Cu-Fe

被引:2
作者
Osinskaya, J., V [1 ]
Pokoev, A., V [1 ]
Magamedova, S. G. [1 ]
机构
[1] Samara Natl Res Univ, Samara 443086, Russia
来源
JOURNAL OF SURFACE INVESTIGATION | 2022年 / 16卷 / 01期
关键词
magnetoplastic effect; aluminum alloy; magnetic field; thermal-magnetic treatment; microhardness; X-ray phase analysis; aging; artificial aging; annealing; quenching;
D O I
10.1134/S1027451022010281
中图分类号
O469 [凝聚态物理学];
学科分类号
070205 ;
摘要
A brief review of the experimental data on the magnetoplastic effect (arising in aluminum alloys after aging in weak constant magnetic fields) obtained in recent years is presented. Information on the composition, modes of thermal-magnetic treatment, the main experimentally observed regularities of changes in the microhardness, the lattice parameter and phase composition of the aluminum alloy Al-Si-Cu-Fe, annealed at a temperature of 175 degrees C, at an annealing time of 4 h, in a constant magnetic field with a strength of 79.6 kA/m up to 557.0 kA/m and in its absence is provided. The main observed regularities of changes in the structure and properties of the material during annealing are formulated.
引用
收藏
页码:159 / 162
页数:4
相关论文
共 35 条
[21]   Revealing the influence of high magnetic field on the solute distribution during directional solidification of Al-Cu alloy [J].
Wang, Pengchuan ;
Shuai, Sansan ;
Huang, Chenglin ;
Liu, Xin ;
Fu, Yanan ;
Wang, Jiang ;
Ren, Zhongming .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 88 :226-232
[22]   Influence of a static magnetic field on the distribution of solute Cu and interdendritic constitutional undercooling in directionally solidified Al-4.5wt.% Cu alloy [J].
Zhu, Li ;
Han, Cui ;
Hou, Long ;
Gagnoud, Annie ;
Fautrelle, Yves ;
Ren, Zhongming ;
Li, Xi .
MATERIALS LETTERS, 2019, 248 :73-77
[23]   Non-monotonic influence of a magnetic field on the electrochemical behavior of Fe;Si;B;glassy alloy in NaOH and NaCl solutions [J].
Hong-di Zhang ;
Xiao-yu Li ;
Jing Pang ;
Li-juan Yin ;
Hai-jian Ma ;
Ying-jie Li ;
Yan Liu ;
Wei-min Wang .
InternationalJournalofMineralsMetallurgyandMaterials, 2014, 21 (10) :1009-1018
[24]   Effect of a magnetic field on macro segregation of the primary silicon phase in hypereutectic Al-Si alloy during directional solidification [J].
Hu, Shaodong ;
Dai, Yanchao ;
Gagnoud, Annie ;
Fautrelle, Yves ;
Moreau, Rene ;
Ren, Zhongming ;
Deng, Kang ;
Li, Chuanjun ;
Li, Xi .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 722 :108-115
[25]   Nanocrystallization of Fe73.5Si13.5B9Nb3Cu1 soft-magnetic alloy from amorphous precursor in a magnetic field [J].
Hiromichi Fujii ;
Victoria A. Yardley ;
Takashi Matsuzaki ;
Sadahiro Tsurekawa .
Journal of Materials Science, 2008, 43 :3837-3847
[26]   The influence of annealing temperature on hyperfine magnetic field and saturation magnetization of Fe-Si-Al-Cr flake-shaped particles [J].
Zhang, Nan ;
Li, Gang ;
Wang, Xin ;
Liu, Tao ;
Xie, Jianliang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 672 :176-181
[27]   Influence of electric field strength applied during the solution heat treatment of the Al-Mg-Si-Cu Alloy AA6111 [J].
Jung, K ;
Conrad, H .
ZEITSCHRIFT FUR METALLKUNDE, 2006, 97 (01) :35-38
[28]   Influence of electric field strength applied during the solution heat treatment of the Al-Mg-Si-Cu Alloy AA6111 [J].
Jung, Kang ;
Conrad, Hans .
International Journal of Materials Research, 2022, 97 (01) :35-38
[29]   Improving the mechanical properties of Al-5Si-1Cu-Mg aluminum alloy produced by laser additive manufacturing with post-process heat treatments [J].
Li, Jing ;
Cheng, Xu ;
Li, Zhuo ;
Zong, Xiao ;
Zhang, Shu-Quan ;
Wang, Hua-Ming .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 735 :408-417
[30]   Influence of hot isostatic pressing on the structure and properties of an innovative low-alloy high-strength aluminum cast alloy based on the Al–Zn–Mg–Cu–Ni–Fe system [J].
Akopyan T.K. ;
Padalko A.G. ;
Belov N.A. .
Russian Metallurgy (Metally), 2015, 2015 (11) :937-942