Transient liquid phase bonding of IC10 single crystal with GH3039 superalloy using BNi2 interlayer: Microstructure and mechanical properties

被引：81

作者：

Zhang, L. X. ^{[1
]}

Sun, Z. ^{[1
]}

Xue, Q. ^{[1
]}

Lei, M. ^{[1
]}

Tian, X. Y. ^{[1
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China

来源：

MATERIALS & DESIGN | 2016年 / 90卷

基金：

中国国家自然科学基金;

关键词：

Transient liquid phase bonding; Isothermal solidification; Mechanical properties; Microstructure; Nickel superalloys; NICKEL-BASE SUPERALLOY; HEAT-TREATMENT; BRAZED JOINTS; TEMPERATURE; FILLER; SOLIDIFICATION; INCONEL-738; IN-738LC; ALLOY; METAL;

D O I：

10.1016/j.matdes.2015.11.041

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Transient liquid bonding (TLP) of IC10 single crystal with GH3039 alloywas carried out using BNi2 interlayer. Microstructure evolution and mechanical properties of the joints bonded at 1050-1200 degrees C for 2 h were investigated. The precipitates in the DZ on the GH3039 side gradually decreased and disappeared with the increase of the bonding temperature. The formation mechanism of the TLP joint was proposed and the asymmetry of the bonding was discussed. Tensile strength and microhardness tests were conducted to investigate the mechanical properties of the joints. The layer of borides with high hardness in the joint bonded at 1150 degrees C significantly reduced the room-temperature tensile strength but had little effect on the high-temperature tensile strength of the joint. The layer of borides became the preferential position to crack during both room-temperature and high-temperature tensile tests. The joints with dispersive precipitates had the highest room-temperature tensile strength and the homogenized joints showed the best ductility. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：949 / 957

页数：9

共 30 条

[1] Transient liquid phase bonding of FSX-414 superalloy at the standard heat treatment condition [J].

Bakhtiari, R. ;

Ekrami, A. .

MATERIALS CHARACTERIZATION, 2012, 66 :38-45

[2] Transient liquid-phase bonding in the Ni-Al-B system [J].

Campbell, CE ;

Boettinger, WJ .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (11) :2835-2847

[3] Laser beam weld-metal microstructure in a yttrium modified directionally solidified Ni3Al-base alloy [J].

Ding, R. G. ;

Ojo, O. A. ;

Chaturvedi, M. C. .

INTERMETALLICS, 2007, 15 (12) :1504-1510

[4]

Duvall D., 1974, TLP bonding: a New Method For Joining Heat Resistant Alloys

[5] Analysis of laser beam weldability of Inconel 738 superalloy [J].

Egbewande, A. T. ;

Buckson, R. A. ;

Ojo, O. A. .

MATERIALS CHARACTERIZATION, 2010, 61 (05) :569-574

[6] Dynamic Responses of Nickel-Based Single Crystal Superalloy DD6 Blade [J].

Fang, Yingwu ;

Li, Yinghong .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (06) :1565-1573

[7] MICROSTRUCTURAL DEVELOPMENT IN TRANSIENT LIQUID-PHASE BONDING [J].

GALE, WF ;

WALLACH, ER .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (10) :2451-2457

[8] Nickel based superalloy welding practices for industrial gas turbine applications [J].

Henderson, MB ;

Arrell, D ;

Larsson, R ;

Heobel, M ;

Marchant, G .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2004, 9 (01) :13-21

[9] Microstructural study of transient liquid phase bonded cast INCONEL 738LC superalloy [J].

Idowu, O. A. ;

Chaturvedi, M. C. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (09) :2787-2796

[10] Influence of bonding variables on transient liquid phase bonding behavior of nickel based superalloy IN-738LC [J].

Jalilvand, V. ;

Omidvar, H. ;

Rahimipour, M. R. ;

Shakeri, H. R. .

MATERIALS & DESIGN, 2013, 52 :36-46

← 1 2 3 →