Influence of plastic deformation on the precipitation sequence in an AA6061 alloy

被引：22

作者：

Chbihi, A. ^{[1
]}

Vincent, S. ^{[1
]}

Ribis, J. ^{[1
]}

Toffolon-Masclet, C. ^{[1
]}

Garnier, J. ^{[1
]}

机构：

[1] Univ Paris Saclay, CEA, DEN Serv Rech Met Appl, F-91191 Gif Sur Yvette, France

来源：

JOURNAL OF MATERIALS SCIENCE | 2017年 / 52卷 / 10期

关键词：

AL-MG-SI; CRYSTAL-STRUCTURE; BETA'-PHASE; SYSTEM; PREDEFORMATION; KINETICS; CU;

D O I：

10.1007/s10853-017-0845-8

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The purpose of this work is to study the effect of prior plastic deformation on the precipitation mechanisms of MgxSiy in an AA6061 alloy. Differential scanning calorimetry (DSC), tensile testing and transmission electron microscopy (TEM) were used to characterize the precipitation sequence in samples that were isothermally aged at 180 A degrees C with and without prior plastic deformation. Compressively deforming the AA6061 alloy by 4% caused a shift in the exothermal precipitation peaks to lower temperatures (DSC) and enabled the peak strength condition to be reached after a shorter aging period, revealing that plastic deformation accelerated the precipitation kinetics. TEM analysis determined that the accelerated precipitation kinetics in the deformed material was due to heterogeneous precipitation of the Q' phase along dislocation lines and a modification of the precipitation sequence with the L, C and Q' phases dominating over the beta'' phase (which is dominated in the non-deformed material). Additionally, the formation of beta' was largely suppressed by plastic deformation.

引用

页码：6063 / 6073

页数：11

共 37 条

[1] The structural relation between precipitates in Al-Mg-Si alloys, the Al-matrix and diamond silicon, with emphasis on the trigonal phase U1-MgAl2Si2 [J].

Andersen, S. J. ;

Marioara, C. D. ;

Vissers, R. ;

Froseth, A. ;

Zandbergen, H. W. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2) :157-169

[2] Crystal structure of the orthorhombic U2-Al4Mg4Si4 precipitate in the Al-Mg-Si alloy system and its relation to the β′ and β" phases [J].

Andersen, SJ ;

Marioara, CD ;

Froseth, A ;

Vissers, R ;

Zandbergen, HW .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 390 (1-2) :127-138

[3] The crystal structure of the β" phase in Al-Mg-Si alloys [J].

Andersen, SJ ;

Zandbergen, HW ;

Jansen, J ;

Traeholt, C ;

Tundal, U ;

Reiso, O .

ACTA MATERIALIA, 1998, 46 (09) :3283-3298

[4] COARSENING OF GRAIN-BOUNDARY PRECIPITATES [J].

ARDELL, AJ .

ACTA METALLURGICA, 1972, 20 (04) :601-&

[5] THE EFFECT OF PLASTIC-DEFORMATION ON AL2CULI (T1) PRECIPITATION [J].

CASSADA, WA ;

SHIFLET, GJ ;

STARKE, EA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (02) :299-306

[6] Influence of severe plastic deformation on aging of Al-Mg-Si alloys [J].

Cerri, E ;

Leo, P .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 410 :226-229

[7] Influence of plastic deformation on the precipitation of Cr in copper [J].

Chbihi, A. ;

Sauvage, X. ;

Blavette, D. .

JOURNAL OF MATERIALS SCIENCE, 2014, 49 (18) :6240-6247

[8] Strengthening mechanisms in ultrafine grained Al-Mg-Si alloy processed by hydrostatic extrusion - Influence of ageing temperature [J].

Chrominski, Witold ;

Wenner, Sigurd ;

Marioara, Calin D. ;

Holmestad, Randi ;

Lewandowska, Malgorzata .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 669 :447-458

[9] Influence of predeformation on ageing in an Al-Zn-Mg alloy -: I.: Microstructure evolution and mechanical properties [J].

Deschamps, A ;

Livet, F ;

Bréchet, Y .

ACTA MATERIALIA, 1998, 47 (01) :281-292

[10] A CALORIMETRIC STUDY OF PRECIPITATION IN COMMERCIAL ALUMINUM ALLOY-6061 [J].

DUTTA, I ;

ALLEN, SM .

JOURNAL OF MATERIALS SCIENCE LETTERS, 1991, 10 (06) :323-326

← 1 2 3 4 →