Systematic errors inherent in the current modeling of the reflected downward flux term used by remote sensing models

An underlying assumption of satellite data assimilation systems is that the radiative transfer model used to simulate observed satellite radiances has no errors. For practical reasons a fast-forward radiative transfer model is used instead of a highly accurate line-by-line model. The fast model usually replaces the spectral integration of spectral quantities with their monochromatic equivalents, and the errors due to these approximations are assumed to be negligible. The reflected downward flux term contains many approximations of this nature, which are shown to introduce systematic errors. In addition, many fast-forward radiative transfer models simulate the downward flux as the downward radiance along a path defined by the secant of the mean emergent angle, the diffusivity factor. The diffusivity factor is commonly set to 1.66 or to the secant of the satellite zenith angle. Neither case takes into account that the diffusivity factor varies with optical depth, which introduces further errors. I review the two most commonly used methods for simulating reflected downward flux by fast-forward radiative transfer models and point out their inadequacies and limitations. An alternate method of simulating the reflected downward flux is proposed. This method transforms the surface-to-satellite transmittance profile to a transmittance profile suitable for simulating the reflected downward flux by raising the former transmittance to the power Of K, where K itself is a function of channel, surface pressure, and satellite zenith angle. It is demonstrated that this method reduces the fast-forward model error for low to moderate reflectivities. (C) 2004 Optical Society of America.