Effect of Sb additions on the creep behaviour of low temperature lead-free Sn-8Zn-3Bi solder alloy

被引:6
作者
Ren, Guang [1 ]
Collins, Maurice [1 ]
机构
[1] Univ Limerick, Bernal Inst, Sch Engn, Stokes Labs, Limerick, Ireland
关键词
Alloys; Pb-free; Creep; Low temperature solder; Creep models; SnZnBi; SN-AG-CU; MECHANICAL-PROPERTIES; THERMOMECHANICAL FATIGUE; THERMAL-BEHAVIOR; MICROSTRUCTURE; NI; DEFORMATION; RESISTANCE; STRENGTH; STRAIN;
D O I
10.1108/SSMT-05-2020-0023
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Purpose This paper aims to investigate the creep behaviour of the recently developed Sn-8Zn-3Bi-xSb (x = 0, 0.5, 1.0 and 1.5) low temperature lead-free solder alloys. Design/methodology/approach An in-house compressive test rig was developed to perform creep tests under stresses of 20-40 MPa and temperature range 25 degrees C-75 degrees C. Dorn power law and Garofalo hyperbolic sine law were used to model the secondary creep rate. Findings High coefficient of determination R-2 of 0.99 is achieved for both the models. It was found that the activation energy of Sn-8Zn-3Bi solder alloy can be significantly increased with addition of Sb, by 60% to 90 kJ/mol approximately, whereas the secondary creep exponent falls in the range 3-7. Improved creep resistance is attributed to solid solution strengthening introduced by micro-alloying. Creep mechanisms that govern the deformation of these newly developed lead-free solder alloys have also been proposed. Originality/value The findings are expected to fill the gap of knowledge on creep behaviour of these newly developed solder alloys, which are possible alternatives as lead-free interconnecting material in low temperature electronic assembly.
引用
收藏
页码:159 / 169
页数:11
相关论文
共 48 条
[31]   Effects of Cu and In Trace Elements on Microstructure and Thermal and Mechanical Properties of Sn-Zn Eutectic Alloy [J].
Pandey, P. ;
Tiwary, C. S. ;
Chattopadhyay, K. .
JOURNAL OF ELECTRONIC MATERIALS, 2019, 48 (05) :2660-2669
[32]   The effect of Bi on the microstructure, electrical, wettability and mechanical properties of Sn-0.7Cu-0.05Ni alloys for high strength soldering [J].
Ramli, M. I. I. ;
Salleh, M. A. A. Mohd ;
Yasuda, H. ;
Chaiprapa, J. ;
Nogita, K. .
MATERIALS & DESIGN, 2020, 186
[33]   The role of eutectic colonies in the tensile properties of a Sn-Zn eutectic solder alloy [J].
Ramos, Lidiane Silva ;
Reyes, Rodrigo Valenzuela ;
Gomes, Leonardo Fernandes ;
Garcia, Amauri ;
Spinelli, Jose Eduardo ;
Silva, Bismarck Luiz .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 776
[34]  
Ren G., 2020, HDB MAT FAILURE ANAL, P107, DOI [10.1016/C2016-0-01325-6, DOI 10.1016/C2016-0-01325-6]
[35]   Improved Reliability and Mechanical Performance of Ag Microalloyed Sn58Bi Solder Alloys [J].
Ren, Guang ;
Collins, Maurice N. .
METALS, 2019, 9 (04)
[36]   On the mechanism of Sn tunnelling induced intermetallic formation between Sn-8Zn-3Bi solder alloys and Cu substrates [J].
Ren, Guang ;
Collins, Maurice N. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 791 :559-566
[37]   The effects of antimony additions on microstructures, thermal and mechanical properties of Sn-8Zn-3Bi alloys [J].
Ren, Guang ;
Collins, Maurice N. .
MATERIALS & DESIGN, 2017, 119 :133-140
[38]   Alloying influences on low melt temperature SnZn and SnBi solder alloys for electronic interconnections [J].
Ren, Guang ;
Wilding, Ian J. ;
Collins, Maurice N. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 665 :251-260
[39]   Thermo-mechanical properties and creep deformation of lead-containing and lead-free solders [J].
Schubert, A ;
Walter, H ;
Dudek, R ;
Michel, B ;
Lefranc, G ;
Otto, J ;
Mitic, G .
INTERNATIONAL SYMPOSIUM ON ADVANCED PACKAGING MATERIALS: PROCESSES, PROPERTIES AND INTERFACES, PROCEEDINGS, 2001, :129-134
[40]   Sn-3.0Ag-0.5Cu/Sn-58Bi composite solder joint assembled using a low-temperature reflow process for PoP technology [J].
Shen, Yu-An ;
Zhou, Shiqi ;
Li, Jiahui ;
Yang, Chih-han ;
Huang, Sijie ;
Lin, Shih-kang ;
Nishikawa, Hiroshi .
MATERIALS & DESIGN, 2019, 183