Microstructural characterization and superelastic response of a Ni50.3Ti29.7Zr20 high-temperature shape memory alloy

被引:48
|
作者
Evirgen, A. [1 ]
Karaman, I. [1 ]
Santamarta, R. [2 ]
Pons, J. [2 ]
Noebe, R. D. [3 ]
机构
[1] Texas A&M Univ, Dept Mat Sci & Engn, College Stn, TX 77843 USA
[2] Univ Illes Balears, Dept Fis, E-07122 Palma De Mallorca, Spain
[3] NASA, Glenn Res Ctr, Struct & Mat Div, Cleveland, OH 44135 USA
基金
美国国家科学基金会;
关键词
High-temperature shape memory alloys; NiTiZr; Superelasticity; Precipitation; Microstructure; CU-ZN-AL; MARTENSITIC-TRANSFORMATION; BEHAVIOR; ZR;
D O I
10.1016/j.scriptamat.2014.02.012
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The microstructure and superelastic response of a Ni50.3Ti29.7Zr20 high-temperature shape memory alloy were studied. The alloy exhibited a recoverable strain level of 5% at 170 degrees C and near-perfect superelasticity up to 250 degrees C under 3% applied strain when fine precipitates were present. In this case, large martensite variants easily formed during the stress-induced martensitic transformation while dislocation motion was impeded. In contrast, poor superelastic response was obtained in samples containing large particles that constrain martensite formation to channels between elongated precipitates. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:12 / 15
页数:4
相关论文
共 50 条
  • [31] Structure-property relationships in a precipitation strengthened Ni-29.7Ti-20Hf (at%) shape memory alloy
    Hornbuckle, B. C.
    Sasaki, T. T.
    Bigelow, G. S.
    Noebe, R. D.
    Weaver, M. L.
    Thompson, G. B.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 637 : 63 - 69
  • [32] Microstructures and Memory Properties of Ti69Zr30Fe1 High-Temperature Shape Memory Alloy
    Zhang Fei
    Cui Yan
    Xue Pengfei
    Li Yan
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (10) : 2131 - 2135
  • [33] Thermal stability and high-temperature shape memory effect of Ti-Ta-Zr alloy
    Zheng, X. H.
    Sui, J. H.
    Zhang, X.
    Yang, Z. Y.
    Wang, H. B.
    Tian, X. H.
    Cai, W.
    SCRIPTA MATERIALIA, 2013, 68 (12) : 1008 - 1011
  • [34] Improvement in the Shape Memory Response of Ti50.5Ni24.5Pd25 High-Temperature Shape Memory Alloy with Scandium Microalloying
    Atli, K. C.
    Karaman, I.
    Noebe, R. D.
    Garg, A.
    Chumlyakov, Y. I.
    Kireeva, I. V.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (10): : 2485 - 2497
  • [35] Thermal stability and high-temperature shape memory characteristics of Ti-20Zr-10Ta alloy
    Zheng Xiao-Hang
    Sui Jie-He
    Zhang Xin
    Yang Zhe-Yi
    Cai Wei
    CHINESE PHYSICS B, 2014, 23 (01)
  • [36] A Low-Cost Ni-Mn-Ti-B High-Temperature Shape Memory Alloy with Extraordinary Functional Properties
    Li, Shaohui
    Cong, Daoyong
    Xiong, Wenxin
    Chen, Zhen
    Zhang, Xin
    Nie, Zhihua
    Li, Shengwei
    Li, Runguang
    Wang, Youkang
    Cao, Yuxian
    Ren, Yang
    Wang, Yandong
    ACS APPLIED MATERIALS & INTERFACES, 2021, 13 (27) : 31870 - 31879
  • [37] Ni24.7Ti50.3Pd25.0 high temperature shape memory alloy with narrow thermal hysteresis and high thermal stability
    Ramaiah, K. V.
    Saikrishna, C. N.
    Gouthama
    Bhaumik, S. K.
    MATERIALS & DESIGN, 2014, 56 : 78 - 83
  • [38] A high-entropy high-temperature shape memory alloy with large and complete superelastic recovery
    Li, Shaohui
    Cong, Daoyong
    Chen, Zhen
    Li, Shengwei
    Song, Chao
    Cao, Yuxian
    Nie, Zhihua
    Wang, Yandong
    MATERIALS RESEARCH LETTERS, 2021, 9 (06): : 263 - 269
  • [39] High temperature shape memory behavior of Ni47.3Ti29.7Hf20Pd3 alloys
    Acar, Emre
    Toker, Guher P.
    Kurkcu, Harun
    Karaca, Haluk E.
    INTERMETALLICS, 2019, 111
  • [40] Enhancement of Shape Memory Properties through Precipitation Hardening in a Ti-Rich Ti-Ni-Pd High Temperature Shape Memory Alloy
    Namigata, Yuki
    Hattori, Yuki
    Khan, M. Imran
    Kim, Hee Young
    Miyazaki, Shuichi
    MATERIALS TRANSACTIONS, 2016, 57 (03) : 241 - 249