Uncertainty in the manufacturing of fibrous thermosetting composites: A review

被引：156
作者：
Mesogitis, T. S. [1 ]
Skordos, A. A. [1 ]
Long, A. C. [2 ]
机构：
[1] Cranfield Univ, Composites Ctr, Mfg & Mat Dept, Sch Appl Sci, Bedford MK43 0AL, England
[2] Univ Nottingham, Div Mat Mech & Struct, Nottingham NG7 2RD, England
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2014年 / 57卷
基金：
英国工程与自然科学研究理事会;
关键词：
Thermosetting resin; Statistical properties/methods; Probabilistic methods; FINITE-ELEMENT-ANALYSIS; LOW-PRESSURE PERMEATION; INPLANE PERMEABILITY; STOCHASTIC SIMULATION; STATISTICAL CHARACTERIZATION; MECHANICAL-PROPERTIES; FABRIC PERMEABILITY; CURE KINETICS; WOVEN CLOTHS; SET-UP;
D O I：
10.1016/j.compositesa.2013.11.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Composites manufacturing involves many sources of uncertainty associated with material properties variation and boundary conditions variability. In this study, experimental and numerical results concerning the statistical characterisation and the influence of inputs variability on the main steps of composites manufacturing including process-induced defects are presented and analysed. Each of the steps of composite manufacturing introduces variability to the subsequent processes, creating strong interdependendes between the process parameters and properties of the final part. The development and implementation of stochastic simulation tools is imperative to quantify process output variabilities and develop optimal process designs in composites manufacturing. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：67 / 75
页数：9
相关论文
共 92 条
[1]   MEASUREMENT OF THE 3-DIMENSIONAL PERMEABILITY OF FIBER PREFORMS USING EMBEDDED FIBER OPTIC SENSORS [J].
AHN, SH ;
LEE, WI ;
SPRINGER, GS .
JOURNAL OF COMPOSITE MATERIALS, 1995, 29 (06) :714-733
[2]   Cure-induced residual strain build-up in a thermoset resin [J].
Antonucci, V ;
Cusano, A ;
Giordano, M ;
Nasser, J ;
Nicolais, L .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (04) :592-601
[3]   Experimental determination of the permeability of textiles: A benchmark exercise [J].
Arbter, R. ;
Beraud, J. M. ;
Binetruy, C. ;
Bizet, L. ;
Breard, J. ;
Comas-Cardona, S. ;
Demaria, C. ;
Endruweit, A. ;
Ermanni, P. ;
Gommer, F. ;
Hasanovic, S. ;
Henrat, P. ;
Klunker, F. ;
Laine, B. ;
Lavanchy, S. ;
Lomov, S. V. ;
Long, A. ;
Michaud, V. ;
Morren, G. ;
Ruiz, E. ;
Sol, H. ;
Trochu, F. ;
Verleye, B. ;
Wietgrefe, M. ;
Wu, W. ;
Ziegmann, G. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (09) :1157-1168
[4]   A multiscale investigation based on variance analysis for hand lay-up composite manufacturing [J].
Avila, AF ;
Morais, DTS .
COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (06) :827-838
[5]   Measurement of the degree of cure of glass fiber-epoxy composites using dielectrometry [J].
Bang, KG ;
Kwon, JW ;
Lee, DG ;
Lee, JW .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) :209-214
[6]   Influence of fibre distribution on the transverse flow permeability in fibre bundles [J].
Bechtold, G ;
Ye, L .
COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (14) :2069-2079
[7]   Modelling of permeability of textile reinforcements: lattice Boltzmann method [J].
Belov, EB ;
Lomov, SV ;
Verpoest, I ;
Peters, T ;
Roose, D ;
Parnas, RS ;
Hoes, K ;
Sol, H .
COMPOSITES SCIENCE AND TECHNOLOGY, 2004, 64 (7-8) :1069-1080
[8]   Investigation of draping and its effects on the mold filling process during manufacturing of a compound curved composite part [J].
Bickerton, S ;
Simacek, P ;
Guglielmi, SE ;
Advani, SG .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1997, 28 (9-10) :801-816
[9]   Experimental analysis and numerical modeling of flow channel effects in resin transfer molding [J].
Bickerton, S ;
Advani, SG ;
Mohan, RV ;
Shires, DR .
POLYMER COMPOSITES, 2000, 21 (01) :134-153
[10]   VOID EFFECTS ON THE INTERLAMINAR SHEAR-STRENGTH OF UNIDIRECTIONAL GRAPHITE-FIBER-REINFORCED COMPOSITES [J].
BOWLES, KJ ;
FRIMPONG, S .
JOURNAL OF COMPOSITE MATERIALS, 1992, 26 (10) :1487-1509
12345678910