Evaluation of the properties of Si3N4/Si3N4 joint brazed using a filler alloy containing Pd

被引：0

作者：

Naka, M

Zhang, J ^{[1
]}

Zhou, Y

机构：

[1] Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China

[2] Osaka Univ, Joining & Welding Res Inst, Ibaraki, Osaka 5670047, Japan

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2003年 / 19卷

关键词：

Si3N4; ceramic; active brazing; Ci-Pd-Ti filler alloy; shear strength;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Si3N4 ceramic was jointed to itself using a filler alloy of Cu76.5Pd8.5Ti15, and the mechanical properties of the joint were measured and analyzed. By using a filler alloy of Cu76.5Pd8.5Ti15, the Si3N4/Si3N4 joints were obtained by brazing at 1373similar to1473 K for 0.9similar to5.4 ks under a pressure of 2 x 10(-3) MPa. The effect of brazing parameters on the shear strength of the joint was investigated. When the brazing temperature and holding time is 1423 K and 5.4 ks respectively, the maximum shear strength of the Si3N4/Si3N4 joint is obtained to be 198 MPa.

引用

页码：187 / 188

页数：2

共 6 条

[1] ADVANCES IN BRAZING OF CERAMICS [J].