Study on vibration-EDM and mass punching of micro-holes

被引:37
作者
Chern, Gwo-Lianq [1 ]
Chuang, Yin [1 ]
机构
[1] Natl Yunlin Univ Sci & Technol, Dept Mech Engn, Yunlin 640, Taiwan
关键词
micro-EDM; micro-punching; WEDG; vibration machining; micro-hole; vibration-EDM;
D O I
10.1016/j.jmatprotec.2006.03.238
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this research vibration-EDM is realized by the vibrating worktable designed, which is employed in the micro-punching machine we had already developed. It is found that larger feed and better surface finish can be achieved in micro-EDM with vibration machining. Circular and noncircular micro-electrodes of diameter below 200 mu m were fabricated with vibration-EDM and the setup of u-axis. Experiments to punch microholes of diameter 200 mu m on SUS304 stainless steel and brass strips were carried out. Mass punching of micro-holes on brass strip was performed successfully, using the automatic feeding system developed. The capability of micro-punching and effects of parameters on the quality of punched micro-hole are studied. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:151 / 160
页数:10
相关论文
共 12 条
[1]   Using workpiece vibration cutting for micro-drilling [J].
Chern, GL ;
Lee, HJ .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (7-8) :688-692
[2]   Development of a micro-punching machine and study on the influence of vibration machining in micro-EDM [J].
Chern, Gwo-Lianq ;
Wu, Ying-Jeng Engin ;
Liu, Shun-Feng .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) :102-109
[3]   A study of ultrasonically aided micro-electrical-discharge machining by the application of workpiece vibration [J].
Gao, CS ;
Liu, ZX .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 139 (1-3) :226-228
[4]  
Gere J. M., 2002, MECH MAT
[5]   Fabrication of series-pattern micro-disk electrode and its application in machining micro-slit of less than 10 μm [J].
Kuo, CL ;
Huang, JD .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (05) :545-553
[6]   A study on the machining of high-aspect ratio micro-structures using micro-EDM [J].
Lim, HS ;
Wong, YS ;
Rahman, M ;
Lee, MKE .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 140 :318-325
[7]  
Masuzawa T., 1985, CIRP Ann., V34, P431
[8]  
OKANO K, 1994, INT J JPN S PREC ENG, V28, P196
[9]  
RENN JC, 2004, J CSME, V25, P89
[10]  
Thoe TB, 1999, J MATER PROCESS TECH, V93, P323