Synthesis of Novel Thermoplastic Polyurethane Using Castor Oil Denatured Polyol

被引:0
|
作者
Konno, Shinya [1 ]
Uchida, Nozomu [2 ]
Kouzai, Hiroaki [2 ]
机构
[1] Kanto Gakuin Univ, Coll Engn, Dept Appl Mat & Life Sci, Kanazawa Ku, 1-50-1 Mutsuura Higashi, Yokohama, Kanagawa 2368501, Japan
[2] Kanto Gakuin Univ, Coll Sci & Engn, Dept Appl Chem, Kanazawa Ku, Yokohama, Kanagawa 2368501, Japan
关键词
Bis(2-hydroxyethyl)terephthalate; Castor Oil; Lipase; Polyurethane; POLY(ETHYLENE GLYCOL); SOFT SEGMENT; DEGRADATION;
D O I
10.1295/koron.2015-0042
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
A Novel linear polyurethane was synthesized by the reaction of 1,6-hexamethylenediisocyanate, Bis(2-hydroxyethyl)terephthalate and castor oil denatured polyol. The polymer was obtained with 51% yield. The molecular weights of the polymer were M-n = 10000, M-w, = 16000, by the measurement of gel permeation chromatography. The temperature for 10% weight loss of the polymer was 270 degrees C by thermogravimetric analysis. The stress, strain and Young's modulus of the polymer was, respectively, 20.19 MPa, 1.43% and 14.11 Mpa by stress -strain curve analysis.
引用
收藏
页码:687 / 689
页数:3
相关论文
共 50 条
  • [1] Synthesis and characterization of polyurethane elastomers from polyol-suspensions of castor oil and yucca starch
    Pulido Florez, Jorge Enrique
    Cabrera Anaya, Juan Manuel
    Navas Gomez, Kelly Johanna
    Valero Valdivieso, Manuel Fernando
    REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA, 2007, (39): : 100 - 111
  • [2] Synthesis and properties of isocyanate curable millable polyurethane elastomers based on castor oil as a renewable resource polyol
    Yeganeh, H
    Mehdizadeh, MR
    EUROPEAN POLYMER JOURNAL, 2004, 40 (06) : 1233 - 1238
  • [3] Synthesis and characterization of castor oil-segmented thermoplastic polyurethane with controlled mechanical properties
    Nguyen Dang Luong
    Le Hoang Sinh
    Minna, Malin
    Juergen, Weisser
    Torsten, Walter
    Matthias, Schnabelrauch
    Jukka, Seppala
    EUROPEAN POLYMER JOURNAL, 2016, 81 : 129 - 137
  • [4] Green polyurethane foams: Replacing petrochemical polyol with castor oil through factorial design
    Alves, Lucas Repecka
    Carriello, Giovanni Miraveti
    Pegoraro, Guilherme Manasses
    Moraes, Carlos Eduardo
    Rezende, Maira de Lourdes
    de Menezes, Aparecido Junior
    JOURNAL OF POLYMER RESEARCH, 2024, 31 (08)
  • [5] Investigation of polyurethane-based pressure-sensitive adhesives with castor oil as a polyol
    Huang, Jian
    Li, Anlong
    Li, Kaichang
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2021, 105
  • [6] Synthesis and Characterization of Novel Castor Oil-Based Polyol for Potential Applications in Coatings
    Sardari, Azam
    Alvani, Ali Asghar Sabbagh
    Ghaffarian, Seyed Reza
    JOURNAL OF RENEWABLE MATERIALS, 2019, 7 (01) : 31 - 40
  • [7] Synthesis and Characterization of Castor Oil-Based Polyurethane Nanocomposites
    Wong, Kai Yi
    Gan, Seng Neon
    Teh, Geok Bee
    Sin, Sau Leng
    MACROMOLECULAR SYMPOSIA, 2018, 382 (01)
  • [8] Synthesis of Rigid Polyurethane Foams Obtained from Castor Oil and Polyglycerol Using Microwave Heating
    Mazo, Paula
    Yarce, Omar
    Rios, Luis A.
    POLIMEROS-CIENCIA E TECNOLOGIA, 2011, 21 (01): : 59 - 66
  • [9] Using Modified Castor Oil as Bio-Polyol in Preparation of Water-Blown Rigid Polyurethane Foam with Microcrystalline Cellulose Reinforcement
    Quang, Ngoc-Anh Thi
    Nguyen, Bich-Thao Thi
    Vo, Khuong Quoc
    CHEMISTRYSELECT, 2025, 10 (10):
  • [10] Synthesis and Properties of Millable Polyurethane Elastomer with Low Content of Halloysite Nanotubes Based on Castor Oil as a Renewable Resource Polyol
    Ouyang, Chunfa
    Gong, Bing
    Gao, Qun
    INTERNATIONAL CONFERENCE ON NEW ENERGY AND RENEWABLE RESOURCES (ICNERR 2015), 2015, : 27 - 31