Investigation of Low-molecular Weight Phenol Formaldehyde Distribution in Tracheid Cell Walls of Chinese Fir Wood

被引:0
作者
Huang, Yanhui [1 ]
Fei, Benhua [2 ]
Zhao, Rongjun [3 ]
机构
[1] Beijing Forestry Univ, Minist Educ, Key Lab Wooden Mat Sci & Applicat, Beijing 100083, Peoples R China
[2] Int Ctr Bamboo & Rattan, Beijing 100102, Peoples R China
[3] Chinese Acad Forestry, Res Inst Wood Ind, Beijing 100091, Peoples R China
基金
中国国家自然科学基金;
关键词
Phenol-formaldehyde resin; Cell wall; Ultraviolet micro-spectrophotometer; Absorbance; RESIN TREATED WOOD; BIOLOGICAL RESISTANCE; SPRUCE WOOD; PENETRATION; MICROSCOPY; HARDNESS; MODULUS; PINE; SEM;
D O I
10.15376/biores.9.3.4150-4158
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
Treatment with water-soluble low-molecular weight phenol-formaldehyde resin is an effective method to improve wood properties. In this paper, plantation wood of Chinese fir was modified with low-molecular weight phenol-formaldehyde resin. The absorbance by tracheid cell walls of phenol-formaldehyde resin in treated and untreated reference samples were measured with an ultraviolet micro-spectrophotometer. The UV absorbance values of earlywood tracheids and middle lamella in treated wood were significantly increased, with an average increase of 49% and 23%, respectively. Moreover, after treatment with low-molecular weight phenol-formaldehyde resin, the UV absorbance of the earlywood tracheid cell walls of Chinese fir increased to more than 47%, regardless of whether or not the cell lumens were filled with resin. After treatment with low-molecular weight phenol-formaldehyde resin, the UV absorbance of earlywood tracheid cell walls at different locations did not vary greatly. This study provides direct support for the improvement of the physical and mechanical properties of resin-modified Chinese fir in terms of penetration of the resin into the cell walls.
引用
收藏
页码:4150 / 4158
页数:9
相关论文
共 21 条
[1]   The maize primary cell wall microfibril: A new model derived from direct visualization [J].
Ding, SY ;
Himmel, ME .
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, 2006, 54 (03) :597-606
[2]   Lignin distribution in wood cell walls determined by TEM and backscattered SEM techniques [J].
Fromm, J ;
Rockel, B ;
Lautner, S ;
Windeisen, E ;
Wanner, G .
JOURNAL OF STRUCTURAL BIOLOGY, 2003, 143 (01) :77-84
[3]   The modification of wood by treatment with low molecular weight phenol-formaldehyde resin: a properties enhancement with neutralized phenolic-resin and resin penetration into wood cell walls [J].
Furuno, T ;
Imamura, Y ;
Kajita, H .
WOOD SCIENCE AND TECHNOLOGY, 2004, 37 (05) :349-361
[4]   Using UV-microscopy to study diffusion of melamine-urea-formaldehyde resin in cell walls of spruce wood [J].
Gindl, W ;
Dessipri, E ;
Wimmer, R .
HOLZFORSCHUNG, 2002, 56 (01) :103-107
[5]   Cell-wall hardness and Young's modulus of melamine-modified spruce wood by nano-indentation [J].
Gindl, W ;
Gupta, HS .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2002, 33 (08) :1141-1145
[6]   SEM and UV-microscopic investigation of glue lines in Parallam® PSL [J].
Gindl, W .
HOLZ ALS ROH-UND WERKSTOFF, 2001, 59 (03) :211-214
[7]  
Huang YH, 2012, BIORESOURCES, V7, P3028
[8]  
Jianna D., 2009, CHINA ADHESIVES, V18, P37
[9]  
Kamke FA, 2007, WOOD FIBER SCI, V39, P205
[10]  
Konnerth J., 2007, EXPT ANAL NANO ENG M, P493