Assessment of uncertainties in life prediction of fatigue crack initiation and propagation in welded rails

被引:43
作者
Josefson, B. Lennart [2 ]
Ringsberg, Jonas W. [1 ]
机构
[1] Chalmers, Dept Shipping & Marine Technol, SE-41296 Gothenburg, Sweden
[2] Chalmers, Dept Appl Mech, SE-41296 Gothenburg, Sweden
关键词
Residual stresses; Welding; Rail; Uncertainty analysis; Multiaxial fatigue; Rolling contact fatigue; ROLLING-CONTACT FATIGUE; RESIDUAL-STRESSES; SIMULATION;
D O I
10.1016/j.ijfatigue.2009.03.024
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The risk for initiation of fatigue cracks in the rail head and web in the weld zone of a rail is studied. The interaction between the welding residual stress field and the stress field caused by service loads is simulated in a nonlinear finite element (FE) analysis where the welding residual stress distribution (shape) and magnitude, the service load magnitude and the material parameters used in the fatigue life estimation are varied. The initiation of fatigue cracks is assessed using the shear-stress-based multiaxial fatigue criterion proposed by Dang Van, and the propagation of fatigue cracks in the rail web is carried out using a Paris-type crack growth law. A discussion is presented of the interpretation of using the Dang Van criterion to assess crack initiation for stress-response load cycles with low shear stress amplitudes and high hydrostatic stress levels. In addition, the accuracy in the fatigue life assessment is evaluated by statistical uncertainty analysis where the variances according to the Gauss approximation formula are studied. The risk for fatigue crack initiation and propagation in the rail head and rail web, respectively, is enhanced due to the welding residual stress, and the uncertainty in load level dominates the uncertainty in the fatigue assessments. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1413 / 1421
页数:9
相关论文
共 20 条
[1]  
[Anonymous], BIAXIAL MULTIAXIAL F
[2]  
CANNON DF, 2000, D229RP2 EPRI
[3]   Heat transfer modelling of rail thermite welding [J].
Chen, Y. ;
Lawrence, F. V. ;
Barkan, C. P. L. ;
Dantzig, J. A. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT, 2006, 220 (03) :207-217
[4]   Mechanisms of mixed mode fatigue crack propagation at rail butt-welds [J].
Desimone, H ;
Beretta, S .
INTERNATIONAL JOURNAL OF FATIGUE, 2006, 28 (5-6) :635-642
[5]   On the application of Dang Van criterion to rolling contact fatigue [J].
Desimone, H ;
Bernasconi, A ;
Beretta, S .
WEAR, 2006, 260 (4-5) :567-572
[6]  
*ERRI, 2000, ICON FIN TECHN REP
[7]  
Josefson BL, 1999, ENGINEERING AGAINST FATIGUE, P365
[8]   Failure modes in aluminothermic rail welds under high axle load conditions [J].
Mutton, PJ ;
Alvarez, EF .
ENGINEERING FAILURE ANALYSIS, 2004, 11 (02) :151-166
[9]  
NIELSEN JCO, 2005, P 8 INT HEAV HAUL C, P789
[10]   Investigation of the rolling contact fatigue resistance of laser cladded twin-disc specimens: FE simulation of laser cladding, grinding and a twin-disc test [J].
Ringsberg, JW ;
Skyttebol, A ;
Josefson, BL .
INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (06) :702-714