Application of a new ultrasonic-assisted semi-solid brazing on dissimilar Al/Mg alloys

被引：20
|
作者：
Xu, Zhiwu [1 ]
Li, Zhengwei [1 ]
Peng, Bo [1 ]
Ma, Zhipeng [1 ]
Yan, Jiuchun [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
来源：
MATERIALS LETTERS | 2018年 / 228卷
基金：
美国国家科学基金会;
关键词：
Ultrasonic; Semi-solid brazing; Intermetallic compound; Microstructure; Diffusion; Cavitation; AL-ALLOY; MG; MAGNESIUM;
D O I：
10.1016/j.matlet.2018.05.131
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, an ultrasonic-assisted semi-solid brazing method was proposed to join Al/Mg. Oxide films on substrate surfaces can be successfully removed even when filler metal was at semi-solid state. A large quantity of intermetallic compounds (IMCs) formed at 460 degrees C because of large amount of Al and Mg dissolved into joint caused by strong cavitation. Decreasing the temperature to 430 degrees C could significantly reduce IMC. However, weak cavitation happened inside low liquid phase fraction at 420 degrees C, making it difficult to break IMCs and solid phases. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：72 / 76
页数：5
相关论文
共 50 条
  • [31] Analysis of interface solid-state reaction on dissimilar ultrasonic spot welding of Al-Mg alloys
    Shin, Hyung-Seop
    de Leon, Michael
    METALS AND MATERIALS INTERNATIONAL, 2017, 23 (03) : 554 - 561
  • [32] INFLUENCE OF THE WORKING TECHNOLOGY ON Al-ALLOYS IN SEMI-SOLID STATE
    Torkar, Matjaz
    Dobersek, Mirko
    Naglic, Iztok
    MATERIALI IN TEHNOLOGIJE, 2009, 43 (04): : 213 - 217
  • [33] Rheological Properties and Microstructure of Hypereutectic Semi-Solid Al-Si-Mg Alloys Using Rheocasting Route
    Tebib, Mehand
    Ajersch, Frank
    Chen, X-Grant
    SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES XII, 2013, 192-193 : 323 - +
  • [34] Preventing formation of intermetallic compounds in ultrasonic-assisted Sn soldering of Mg/Al alloys through pre-plating a Ni coating layer on the Mg substrate
    Liu, Yingzong
    Li, Yuanxing
    Chen, Hui
    Zhu, Zongtao
    JOURNAL OF MAGNESIUM AND ALLOYS, 2024, 12 (02) : 726 - 741
  • [35] Inhibition of intermetallic compounds using pure Ni or Ni-Al2O3 nanocomposite coating during the ultrasonic-assisted soldering of Mg/Al dissimilar metals
    Liu, Yingzong
    Li, Yuanxing
    Cui, Jinzhe
    Zhu, Zongtao
    Chen, Hui
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2024, 328
  • [36] A new semi-solid casting technique for fabricating SiC-reinforced Mg alloys matrix composites
    Esmaily, M.
    Mortazavi, N.
    Svensson, J. E.
    Halvarsson, M.
    Wessen, M.
    Johansson, L. G.
    Jarfors, A. E. W.
    COMPOSITES PART B-ENGINEERING, 2016, 94 : 176 - 189
  • [37] Microstructure and mechanical properties of Ti-6Al-4V/Al1060 joints by ultrasonic-assisted brazing in air
    Chen, Xiaoguang
    Yan, Jiuchun
    Ren, Sichao
    Wei, Jinghui
    Wang, Qian
    MATERIALS LETTERS, 2013, 95 : 197 - 200
  • [38] Dislocation density based constitutive model for ultrasonic vibration assisted friction stir welding of dissimilar Al/Mg alloys
    Zhang, Guanlan
    Gao, Jinqiang
    Wu, ChuanSong
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 131 : 336 - 355
  • [39] Investigation of Rheological Behaviour of Liquid and Semi-solid Magnesium Alloys of Mg-Zn-Al, Mg-Zn-RE Groups
    Slezak, M.
    HIGH TEMPERATURE, 2019, 57 (06) : 863 - 869
  • [40] Research progress on microstructure evolution of semi-solid aluminum alloys in ultrasonic field and their rheocasting
    Wu Shusen
    Lin Chong
    Lu Shulin
    Sha Meng
    CHINA FOUNDRY, 2014, 11 (04) : 258 - 267
12345