Application of a new ultrasonic-assisted semi-solid brazing on dissimilar Al/Mg alloys

被引：20
|
作者：
Xu, Zhiwu [1 ]
Li, Zhengwei [1 ]
Peng, Bo [1 ]
Ma, Zhipeng [1 ]
Yan, Jiuchun [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
来源：
MATERIALS LETTERS | 2018年 / 228卷
基金：
美国国家科学基金会;
关键词：
Ultrasonic; Semi-solid brazing; Intermetallic compound; Microstructure; Diffusion; Cavitation; AL-ALLOY; MG; MAGNESIUM;
D O I：
10.1016/j.matlet.2018.05.131
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, an ultrasonic-assisted semi-solid brazing method was proposed to join Al/Mg. Oxide films on substrate surfaces can be successfully removed even when filler metal was at semi-solid state. A large quantity of intermetallic compounds (IMCs) formed at 460 degrees C because of large amount of Al and Mg dissolved into joint caused by strong cavitation. Decreasing the temperature to 430 degrees C could significantly reduce IMC. However, weak cavitation happened inside low liquid phase fraction at 420 degrees C, making it difficult to break IMCs and solid phases. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：72 / 76
页数：5
相关论文
共 50 条
  • [1] Reduction of intermetallic compounds in ultrasonic-assisted semi-solid brazing of Al/Mg alloys
    Xu, Zhiwu
    Li, Zhengwei
    Xu, Lei
    Yan, Jiuchun
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (02) : 163 - 170
  • [2] Ultrasonic-assisted brazing of Al-Ti dissimilar alloy by a filler metal with a large semi-solid temperature range
    Chen, Xiaoguang
    Xie, Ruishan
    Lai, Zhiwei
    Liu, Lei
    Zou, Guisheng
    Yan, Jiuchun
    MATERIALS & DESIGN, 2016, 95 : 296 - 305
  • [3] Control of intermetallic compounds in Ultrasonic-Assisted Sn soldering of Mg/Al alloys
    Liu, Yingzong
    Bai, Yujie
    Chen, Jintao
    Chen, Hui
    Zhu, Zongtao
    Li, Yuanxing
    MATERIALS & DESIGN, 2022, 223
  • [4] Microstructure of Ultrasonic-assisted Soldering Mg/Al Dissimilar Metal Joints
    Yu Weiyuan
    Gao Mengzhao
    Zhang Tianyu
    Shang Jiangxu
    Yan Zehua
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (10) : 3197 - 3202
  • [5] Application of semi-solid forming to Mg-Zn-Al-Ca alloys
    Kamado, S
    Ikeya, N
    Rudi, RS
    Araki, T
    Kojima, Y
    MAGNESIUM ALLOYS 2000, 2000, 350-3 : 205 - 213
  • [6] Superior creep behavior of n-SiCp/Mg-9%Al composites fabricated by ultrasonic-assisted semi-solid hot pressing of powder
    Li, Ming
    Chen, Qiang
    Zhao, Gaozhan
    Huang, Zhiwei
    Tao, Jianquan
    Wan, Yuanyuan
    Wang, Hongxia
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2019, 125 (02):
  • [7] Ultrafast ultrasonic-assisted transient liquid bonding Al/Mg in air
    Li, Zhengwei
    Xu, Zhiwu
    Peng, Liming
    Yan, Jiuchun
    MATERIALS CHARACTERIZATION, 2022, 190
  • [8] Ultrasonic-assisted fluxless reactive bonding of Mg/Al dissimilar alloy using Zn-Al solder in air
    Lai, Zhiwei
    Pan, Chuan
    Du, Huiqiao
    Chen, Xiaoguang
    Xie, Ruishan
    Liu, Lei
    Long, Weimin
    Zou, Guisheng
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2018, 23 (01) : 19 - 27
  • [9] Application of semi-solid forming to heat resistant Mg-Zn-Al-RE-Ca alloys
    Antara, NG
    Kayuta, T
    Kamado, S
    Kojima, Y
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 1247 - 1250
  • [10] Formation and microstructure of ultrasonic-assisted friction stir lap welding dissimilar Al/Ti alloys
    Mao Z.
    Wu S.
    Liu X.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (02): : 145 - 148
12345