Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF4 at atmospheric pressure

被引:79
|
作者
Zhang, Cheng [1 ,2 ]
Zhou, Yang [1 ]
Shao, Tao [1 ,2 ]
Xie, Qing [3 ]
Xu, Jiayu [1 ]
Yang, Wenjin [1 ,2 ]
机构
[1] Chinese Acad Sci, Inst Elect Engn, Beijing 100190, Peoples R China
[2] Chinese Acad Sci, Key Lab Power Elect & Elect Drive, Beijing 100190, Peoples R China
[3] North China Elect Power Univ, State Key Lab Alternate Elect Power Syst Renewabl, Baoding 071003, Peoples R China
基金
中国国家自然科学基金;
关键词
Dielectric barrier discharge (DBD); Nanosecond pulse; Surface modification; Hydrophobicity; Polymethylmethacrylate; Carbon tetrafluoride; DIELECTRIC BARRIER DISCHARGE; PLASMA; DEPOSITION; FILMS; COATINGS;
D O I
10.1016/j.apsusc.2014.05.091
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Nanosecond-pulse dielectric barrier discharge (DBD) can provide non-thermal plasmas with extremely high energy and high density, which can result in a series of complicated physical and chemical reactions in the surface treatment of polymers. Therefore, in this paper, hydrophobic treatment of polymethylmethacrylate (PMMA) surface is conducted by nanosecond-pulse DBD in carbon tetrafluoride (CF4) at atmospheric pressure. Investigations on surface morphology and chemical composition before and after the DBD treatment in CF4 are conducted with the contact angle measurement, atomic force microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectrometer. The effects of the applied voltage, CE4 flow rate, and treatment time on the hydrophobic modification are studied. Results show that the contact angles of the treated PMMA surface increases with the applied voltage, and it could be greatly affected by the CF4 flow rate and the treatment time. The water contact angle can increase from 680 to 1000 after the treatment. Furthermore, both surface morphology and chemical composition of the PMMA samples are changed. Both the increase of the surface roughness and the occurrence of fluorine-containing functional groups on the PMMA surface treated by DBD in CF4 lead to the hydrophobicity improvement of the PMMA surface after high CF4 flow rate and long time treatment. Moreover, due to the small amount of oxygen in the DBD plasma, hydrophilic effect exists on the PMMA surface after small CE4 flow rate treatment. Similar phenomenon occurs at short time treatment. It is because that -CH2F, -CHF, -CHF2 groups, having hydrophilic property, are likely generated in the initial stage of hydrogen abstraction. In addition, because the residual groups (mainly -CF, -CF2 and -CF3) on the PMMA surface have strong hydrophobic property, the hydrophobic behavior of the treated PMMA surface could maintain for 8-day aging period. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码:468 / 477
页数:10
相关论文
共 48 条
  • [41] Surface structure and surface barrier characteristics of boron-doped diamond in electrolytes after CF4 plasma treatment in RF-barrel reactor
    Denisenko, A.
    Romanyuk, A.
    Pietzka, C.
    Scharpf, J.
    Kohn, E.
    DIAMOND AND RELATED MATERIALS, 2010, 19 (5-6) : 423 - 427
  • [42] Impact of CF4 Plasma Treatment on the Surface Roughness of Ion Implanted SiC Induced by High Temperature Annealing
    Sugimoto, T.
    Satoh, M.
    Nakamura, T.
    Mashimo, K.
    Doi, H.
    Shibagaki, M.
    SILICON CARBIDE AND RELATED MATERIALS 2009, PTS 1 AND 2, 2010, 645-648 : 783 - +
  • [43] Formation and characterization of hydrophobic glass surface treated by atmospheric pressure He/CH4 plasma
    Noh, Sooryun
    Moon, Se Youn
    JOURNAL OF APPLIED PHYSICS, 2014, 115 (04)
  • [44] Dry etching characteristics of Si-based materials using CF4/O2 atmospheric-pressure glow discharge plasma
    Kataoka, Y
    Kanoh, M
    Makino, N
    Suzuki, K
    Saitoh, S
    Miyajima, H
    Mori, Y
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2000, 39 (01): : 294 - 298
  • [45] Effects of substrate bias power on the surface of ITO electrodes during O2/CF4 plasma treatment and the resulting performance of organic light-emitting diodes
    Han, D. M.
    Lee, J. H.
    Jeong, K. H.
    Lee, J. G.
    METALS AND MATERIALS INTERNATIONAL, 2010, 16 (04) : 627 - 632
  • [46] Comparison of Properties of Atmospheric-Pressure Radio Frequency He/SF6/O2 and He/CF4/O2 Discharges
    Kimura, Takashi
    Tanahashi, Hiroki
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2010, 49 (02)
  • [47] Effects of substrate bias power on the surface of ITO electrodes during O2/CF4 plasma treatment and the resulting performance of organic light-emitting diodes
    D. M. Han
    J. H. Lee
    K. H. Jeong
    J. G. Lee
    Metals and Materials International, 2010, 16 : 627 - 632
  • [48] Fabrication of PDMS through-holes using the MIMIC method and the surface treatment by atmospheric-pressure CH4/He RF plasma
    Choi, Jongchan
    Lee, Kyeong-Hwan
    Yang, Sung
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (09)