The influence of the ratio of "rotational speed/traverse speed" (ω/ν) on mechanical properties of AZ31 friction stir welds

被引：118

作者：

Gharacheh, M. Abbasi ^{[1
]}

Kokabi, A. H. ^{[1
]}

Daneshi, G. H. ^{[1
]}

Amirkhiz, Babak Shalchi ^{[1
]}

Sarrafi, R. ^{[1
]}

机构：

[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2006年 / 46卷 / 15期

关键词：

Friction Stir Welding (FSW); AZ31 magnesium alloy; mechanical properties; shear punch test (SPT); incomplete root penetration;

D O I：

10.1016/j.ijmachtools.2006.01.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The influence of different parameters such as welding pressure, rotational speed, and traverse speed on the weld properties has been evaluated earlier but there are some important parameters yet to be thoroughly investigated. In this study, an effort has been made to determine the influence of different ratios of rotational speed/traverse speed on mechanical properties of different zones of friction stir welded AZ31 magnesium alloy. Mechanical properties of different zones were determined by a shear punch test. It was found out that increasing the aforementioned ratio-leads to a slight decrease in yield and ultimate strength of the stir zone and the transitional zone. It was also observed that increasing rotational/traverse speed ratio increases the weld nugget size and decreases the incomplete root penetration. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：1983 / 1987

页数：5

共 19 条

[1] AMIRIZAD M, 2006, MATER LETT, V40, P565
[2] [Anonymous], USE SMALL SCALE SPEC
[3] Finite element modeling of friction stir welding - thermal and thermomechanical analysis
Chen, CM
Kovacevic, R
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (13) : 1319 - 1326
[4] GHARACHEH MA, 2005, THESIS SHARIF U TECH
[5] Evaluation of mechanical properties using shear-punch testing
Guduru, RK
Darling, KA
Kishore, R
Scattergood, RO
Koch, CC
Murty, KL
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2): : 307 - 314
[6] Effect of low temperature irradiation on the mechanical properties of ternary V-Cr-Ti alloys as determined by tensile tests and shear punch tests
Hamilton, ML
Toloczko, MB
[J]. JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) : 488 - 491
[7] HAMILTON ML, 1996, EFFECT RADIAT MAT, P1057
[8] KARTHIK V, 2002, WELD J, P265
[9] Small punch testing for assessing the tensile strength of gradient AlNi-SiC composites
León, CA
Drew, RAL
[J]. MATERIALS LETTERS, 2002, 56 (05) : 812 - 816
[10] Tensile behavior of friction-stir-welded AZ31-H24 Mg alloy
Lim, S
Kim, S
Lee, CG
Yim, CD
Kim, SJ
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (06): : 1609 - 1612

← 1 2 →