Improved integrity assessment equations of pipe bends

Pipe bend or elbow is one of the important components in any piping system. Accurate integrity assessment of these pipe bends is very important for reliable operation of all types of plants including nuclear plants. While considerable research has been done in the last few decades to develop accurate integrity assessment procedures of straight pipe with or without cracks, similar efforts were missing for pipe bend or elbow. Reactor Safety Division, Bhabha Atomic Research Centre in collaboration with MPA, University of Stuttgart had embarked upon a comprehensive component integrity test program (CITP) in around 1998 to develop improved integrity assessment methods of piping components in general and elbow in particular. As a part of this program, detailed analytical, numerical and experimental investigations for so many years have generated large number of new equations for improved integrity assessment of elbows. Mainly three aspects of the integrity assessment procedure are focused - development of improved plastic collapse moment equations, proposing new elastic-plastic J-integral and crack opening displacement (COD) estimation schemes to simplify leak-before-break (LBB) analysis and presenting new eta and gamma expressions to evaluate J-R curve from test data. All these newly proposed equations have been validated with the findings of the test data, generated as a part of the CITP A reasonably good to excellent matching between predictions of the newly proposed equations and test results have been observed in all the cases. The present paper enumerates these research findings in a consolidated yet brief manner. (C) 2008 Elsevier Ltd. All rights reserved.