Preserving Both Lignin and Cellulose Chemical Structures: Flow-Through Acid Hydrotropic Fractionation at Atmospheric Pressure for Complete Wood Valorization

Poplar wood was rapidly fractionated via a flow-through reaction using aqueous solutions of an acid hydrotrope (AH), p-toluenesulfonic acid (p-TsOH), at temperatures below 98 degrees C.C-13-H-1 two-dimensional nuclear magnetic resonance (NMR) spectroscopic analyses demonstrated that the AH-solubilized lignins (AHLs) from a range of fractionation conditions with yields up to approximately 80% had a very high content of beta-aryl-ether linkages compared to milled wood lignin (MWL) with a low enough condensation to facilitate subsequent reductive catalytic depolymerization resulting in a lignin monomer yield of over 30%. Gel-permeation chromatographic (GPC) and differential scanning calorimetric (DSC) analyses showed that the AHLs have high molecular weights and low glass transition temperatures T-g. These AHLs also have a pinkish color suitable for applications such as cosmetics and dye dispersants. AR fractionation (AHF) preserved the cellulose fraction as solid fibers also with a light pinkish color for the materials market and solubilized up to approximately 90% of xylan which can be converted to furfural using p-TsOH in the spent liquor without additional catalysts. The advantages herein are the use of one recyclable industrial chemical such as p-TsOH in an aqueous system below water boiling temperature to valorize all three major fractions of lignocelluloses in a short time frame, with very promising yields and well-preserved lignin and cellulose structure.