Simulation and experimental verification of a fuel calibration system based on metering cylinder

被引：7
|
作者：
Wang, Bin [1 ]
Jin, Xin [1 ]
Huang, Ruo [1 ]
Chen, Shilong [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Jiangsu Prov Key Lab Aerosp Power Syst, Nanjing 210016, Jiangsu, Peoples R China
来源：
FLOW MEASUREMENT AND INSTRUMENTATION | 2014年 / 38卷
关键词：
Turbine flowmeter; Calibration; Metering cylinder; Meter coefficient;
D O I：
10.1016/j.flowmeasinst.2014.05.020
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Simulation and experimental verification of a fuel calibration system based on hydraulic metering cylinder has been carried out in this paper. A novel hydraulic metering cylinder is designed for more accurate flow rate measurement. The calibration workbench with this cylinder is presented and mathematically modeled. Also, the calibration system is numerically simulated in AMESim. The simulation results show that the calibration system can work smoothly. In addition, the impact of given plunger speeds and calibration strokes on the accuracy of the calibration results is experimentally verified. It can be found that stroke of approximate 600 mm and a medium given speed are the most effective ways to reduce the measuring error under the experimental condition provided in this paper. Moreover, a calibration error less than 0.5% is achieved in the fuel calibration system. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：131 / 138
页数：8
相关论文
共 50 条
  • [31] X-ray dual-energy calibration based on estimated spectral properties of the experimental system
    Hassler, U
    Garnero, L
    Rizo, P
    IEEE TRANSACTIONS ON NUCLEAR SCIENCE, 1998, 45 (03) : 1699 - 1712
  • [32] Experimental Light Scattering by Small Particles: System Design and Calibration
    Maconi, Goran
    Kassamakov, Ivan
    Penttila, Antti
    Gritsevich, Maria
    Haeggstrom, Edward
    Muinonen, Karri
    OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION X, 2017, 10329
  • [33] Computer Based System for Sources Automated Calibration
    Slavov, Vladislav
    Tashev, Tasho
    RECENT ADVANCES AND APPLICATIONS OF COMPUTER ENGINEERING: PROCEEDINGS OF THE 9TH WSEAS INTERNATIONAL CONFERENCE (ACE 10), 2010, : 144 - +
  • [34] THE CALIBRATION SYSTEM FOR ESD SIMULATOR BASED ON LABVIEW
    Du, X. M.
    Wu, Z. C.
    Chen, X.
    PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON APPLIED ELECTROSTATICS, 2008, : 285 - 288
  • [35] Calibration and uncertainty analysis of a combined tracking-based vision measurement system using Monte Carlo simulation
    Jiang, Tao
    Cui, Haihua
    Cheng, Xiaosheng
    Du, Kunpeng
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2021, 32 (09)
  • [36] Optimization-based assisted calibration of traffic simulation models
    Hale, David K.
    Antoniou, Constantinos
    Brackstone, Mark
    Michalaka, Dimitra
    Moreno, Ana T.
    Parikh, Kavita
    TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES, 2015, 55 : 100 - 115
  • [37] Calibration of a rule-based intelligent network simulation model
    Memon A.A.
    Meng M.
    Wong Y.D.
    Lam S.H.
    Journal of Modern Transportation, 2016, 24 (1): : 48 - 61
  • [38] A Modified Technique for Calibration of Current-Comparator-Based Capacitance Bridge and Its Verification
    Faisal, Agah
    Jung, Jae Kap
    So, Eddy
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2011, 60 (07) : 2642 - 2647
  • [39] An experimental device for calibration of concentration and velocity of two-phase flow based on electrical impedance measurement system
    Wu, Jiacheng
    Yue, Shihong
    Ma, Haitao
    2021 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC 2021), 2021,
  • [40] A parameter calibration method with constraint based on laboratory experimental result
    Wang, Xiao-Yan (cnuwxy@sohu.com), 1600, Chinese Society for Environmental Sciences (37):
12345