Current Leads Cooling for the Series-Connected Hybrid Magnets

被引：6

作者：

Bai, Hongyu ^{[1
]}

Marshall, William S. ^{[1
]}

Bird, Mark D. ^{[1
]}

Gavrilin, Andrew V. ^{[1
]}

Weijers, Hubertus W. ^{[1
]}

机构：

[1] Florida State Univ, Natl High Magnet Field Lab, Tallahassee, FL 32310 USA

来源：

ADVANCES IN CRYOGENIC ENGINEERING | 2014年 / 1573卷

关键词：

Current Lead; Series-Connected Hybrid; HTS Current Lead; BSCCO;

D O I：

10.1063/1.4860913

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Two Series-Connected Hybrid (SCH) magnets are being developed at the National High Magnetic Field Laboratory. Both SCH magnets combine a set of resistive Florida-Bitter coils with a superconducting outsert coil constructed of the cable-in-conduit conductor (CICC). The outsert coils of the two magnets employ 20 kA BSCCO HTS current leads for the power supply although they have different designs and cooling methods. The copper heat exchangers of the HTS current leads for the HZB SCH are cooled with forced flow helium at a supply temperature of 44 K, while the copper heat exchangers of HTS current leads for NHMFL SCH are cooled with liquid nitrogen at a temperature of 78 K in a self-demand boil-off mode. This paper presents the two cooling methods and their impacts on cryogenic systems. Their efficiencies and costs are compared and presented.

引用

页码：1707 / 1712

页数：6

共 50 条

[31] Control of fault current limiter by series-connected voltage sag compensator
Polmai, S
Ise, T
Yamada, M
ELECTRICAL ENGINEERING IN JAPAN, 2006, 155 (02) : 64 - 72
[32] A Series-Connected Hybrid Modular Multilevel Converter for HVDC Tapping Application
Wang, Can
Yang, Yunming
Ooi, B. T.
2019 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), 2019, : 367 - 372
[33] LEAKAGE CURRENT MODELING OF SERIES-CONNECTED THIN-FILM TRANSISTORS
STURM, JC
WU, IW
HACK, M
IEEE TRANSACTIONS ON ELECTRON DEVICES, 1995, 42 (08) : 1561 - 1563
[34] Series-connected, all-hybrid converters for utility interactive applications
Kamath, GR
Mohan, N
IECON '97 - PROCEEDINGS OF THE 23RD INTERNATIONAL CONFERENCE ON INDUSTRIAL ELECTRONICS, CONTROL, AND INSTRUMENTATION, VOLS. 1-4, 1997, : 726 - 731
[35] Hybrid Dynamic Voltage Balancing Technique for Series-Connected SiC MOSFETs
Wang, Zhe
Dong, Kan
Ma, Yingtao
Liu, Weizhi
Zheng, Zedong
Li, Yongdong
2019 IEEE 13TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS (PEDS), 2019,
[36] Series-Connected Current-Source Inverters: fSW=60 Hz
Xing, Ling
Wei, Qiang
IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (09) : 8882 - 8885
[37] Control of fault current limiter by series-connected voltage sag compensator
Polmai, Sompob
Ise, Toshifumi
Yamada, Masato
Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), 2006, 155 (02): : 64 - 72
[38] Mechanical Analysis of the Superconducting Outsert for the Series Connected Hybrid Magnets
Zhai, Yuhu
Dixon, Iain R.
Bird, Mark D.
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2009, 19 (03) : 1608 - 1611
[39] Design of N2 Cooled Bi-2223 HTS Current Leads for use in 0.4T Field for the NHMFL Series-Connected Hybrid Magnet
Marshall, W. Scott
Bai, Hongyu
Bird, Mark D.
Dixon, Iain R.
Gavrilin, Andrew V.
Miller, George E.
Napier, Sarah E.
Noyes, Patrick D.
Weijers, Hubertus W.
White, J. Michael
ADVANCES IN CRYOGENIC ENGINEERING, 2014, 1573 : 1018 - 1025
[40] Modeling of Series-Connected Photovoltaic Cells
Al Tarabsheh, A.
Etier, I.
Akmal, M.
Sweleh, A.
Ghazal, M.
2016 IEEE 43RD PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2016, : 1523 - 1526

← 1 2 3 4 5 →