Tribological improvement of titanium alloy surfaces through texturing and TiAlN coating

被引：31
作者：
Ananth, M. Prem [1 ]
Ramesh, R. [1 ]
机构：
[1] Sri Venkateswara Coll Engn, Dept Mech Engn, Madras 602117, Tamil Nadu, India
来源：
SURFACE ENGINEERING | 2014年 / 30卷 / 10期
关键词：
Texturing; Lapping; Chromium interlayer; Coefficient of friction; Specific wear rate; Normal load variation; STEEL SURFACES; PVD TIN; WEAR; INTERLAYERS; ADHESION; BEHAVIOR; FILMS; CRN;
D O I：
10.1179/1743294414Y.0000000293
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Titanium alloys are characterised by poor wear resistance properties and its utilisation has been excessive in non-tribological applications. Surface texturing is a renowned and effective means of surface modification technique to improve the tribological properties of sliding surfaces. In the present work, modification of titanium alloy surfaces was done by lapping and laser surface texturing. The modified surfaces were coated by titanium aluminium nitride (TiAlN) nanocomposite coating with chromium as interlayer by cathodic arc physical vapour deposition system. The adhesion characteristics of the coatings were evaluated using a scratch tester and recognised that coating adherence has been improved by 8% through texturing. The effect of normal load on friction and wear characteristics were examined and discussed. The present work is aimed for investigating the bonding strength, friction coefficient and wear behaviour of bilayer composite coating over modified titanium alloy substrates under dry sliding contact condition.
引用
收藏
页码：758 / 762
页数：5
相关论文
共 14 条
  • [1] Corrosion behavior of nanolayered TiN/NbN multilayer coatings prepared by reactive direct current magnetron sputtering process
    Barshilia, HC
    Prakash, MS
    Poojari, A
    Rajam, KS
    [J]. THIN SOLID FILMS, 2004, 460 (1-2) : 133 - 142
  • [2] Structure and properties of reactive DC magnetron sputtered TiN/NbN hard superlattices
    Barshilia, HC
    Rajam, KS
    [J]. SURFACE & COATINGS TECHNOLOGY, 2004, 183 (2-3) : 174 - 183
  • [3] Dimples shape and distribution effect on characteristics of Stribeck curve
    Galda, Lidia
    Pawlus, Pawel
    Sep, Jaroslaw
    [J]. TRIBOLOGY INTERNATIONAL, 2009, 42 (10) : 1505 - 1512
  • [4] The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel
    Gerth, J.
    Wiklund, U.
    [J]. WEAR, 2008, 264 (9-10) : 885 - 892
  • [5] Effect of electroless nickel interlayer on the electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive dc magnetron sputtering
    Grips, VKW
    Selvi, VE
    Barshilia, HC
    Rajam, KS
    [J]. ELECTROCHIMICA ACTA, 2006, 51 (17) : 3461 - 3468
  • [6] Low-speed milling of stainless steel with TiAlN single-layer and TiAlN/AlCrN nano-multilayer coated carbide tools under different lubrication conditions
    Liew, W. Y. H.
    [J]. WEAR, 2010, 269 (7-8) : 617 - 631
  • [7] EIS comparison on corrosion performance of PVD TiN and CrN coated mild steel in 0.5 N NaCl aqueous solution
    Liu, C
    Bi, Q
    Matthews, A
    [J]. CORROSION SCIENCE, 2001, 43 (10) : 1953 - 1961
  • [8] Comparison of tribological behaviours of AlCrN and TiAlN coatings - Deposited by physical vapor deposition
    Mo, J. L.
    Zhu, M. H.
    Lei, B.
    Leng, Y. X.
    Huang, N.
    [J]. WEAR, 2007, 263 (7-12 SPEC. ISS.) : 1423 - 1429
  • [9] Muthuvel Prem Ananth, 2013, Advanced Materials Research, V622-623, P787, DOI 10.4028/www.scientific.net/AMR.622-623.787
  • [10] Novel layered tribological coatings using a superelastic NiTi interlayer
    Ni, WY
    Cheng, YT
    Lukitsch, M
    Weiner, AM
    Lev, LC
    Grummon, DS
    [J]. WEAR, 2005, 259 : 842 - 848
12