Treatment of swine wastewater using MLE process and membrane bio-reactor

被引:13
作者
Chung, YJ [1 ]
Choi, HN
Cho, JB
Park, SK
机构
[1] Ajou Univ, Dept Civil & Environm Engn, Suwon 441749, South Korea
[2] Aquatech Inc, Suwon, South Korea
[3] Hyundai Engn Co Ltd, Seoul, South Korea
关键词
MBR; modified Ludzack Ettinger process; nitrogen removal; solids/liquid separation; swine wastewater;
D O I
10.2166/wst.2004.0786
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The aim of this study was to develop the optimum integrated treatment system for slurry type swine wastewater through field testing. Although composting and liquid composting are the most desirable processes to treat swine wastewater, inadequate composting has been blamed as critical non-point source pollutants. In the area with limited crop land and grass land, the most feasible method to handle slurry type swine wastewater would be that the solids portion from the solids/liquid separation process is treated by composting and then the liquid portion is treated by a series of wastewater treatment processes, including physicochemical treatment system and biological nutrient removal systems such as the modified Ludzack Ettinger (MLE) process and MLE process coupled with a membrane, to satisfy the different effluent criteria. When using the appropriate solids/liquid separation system, the removal efficiency of SS, CODCr, and TKN was 92.4%, 73.6%, and 46.0%, respectively and the amount of bulking agent required for composting and organic loading rate for the following wastewater treatment system can be reduced by 94.8% and 84.7%, respectively. When treating the effluent from solids/liquid separation process by MLE process, the optimal volume fraction for denitrification was 20% of total reactor volume and the optimum ratio of F/M and F-N/M were increased with increase of C/N ratio. Since the effluent quality of MLE process is not enough to discharge, the DAF process was operated with addition of FeCl3 and cationic polyelectrolyte. The effluent from the DAF process was treated in the MLE process coupled with a crossflow ultrafiltration membrane to satisfy more stringent effluent criteria. When external carbon source is added to keep 6.0 of C/N ratio, the efficiency of denitrification is best. The optimum linear velocity and transmembrane pressure for MBR process was 1.8m/sec and 2.1atm, respectively. By addition of external carbon source, nitrogen compounds, especially NOx-N, were considerably removed. And by addition of powdered activated carbon, the removal efficiency of CODCr and CODMn and the membrane flux were increased dramatically.
引用
收藏
页码:443 / 450
页数:8
相关论文
共 15 条
[1]  
[Anonymous], 1998, STAND METH EX WAT WA, V20th
[2]  
BURDICK CR, 1982, J WATER POLLUT CON F, V54, P1078
[3]   DISTRIBUTION OF WATER IN SLUDGES IN RELATION TO THEIR MECHANICAL DEWATERING [J].
COLIN, F ;
GAZBAR, S .
WATER RESEARCH, 1995, 29 (08) :2000-2005
[4]   Optimization of nitrogen removal from piggery waste by nitrite nitrification [J].
Eum, Y ;
Choi, E .
WATER SCIENCE AND TECHNOLOGY, 2002, 45 (12) :89-96
[5]  
FATOS G, 1993, BIORESOURCE TECHNOL, V45, P205
[6]  
FRIEDA O, 1997, WATER RES, V31, P391
[7]   Biological oxidation of high strength nitrogenous wastewater [J].
Gupta, SK ;
Sharma, R .
WATER RESEARCH, 1996, 30 (03) :593-600
[8]  
HAVE PJW, 1994, BIORESOURCE TECHNOL, V47, P135
[9]  
IVAN M, 1996, WATER RES, V30, P2107
[10]  
JOHN RS, 1984, J WAT POLLUT CONTROL, V56, P143