The influence of aging on the microstructure and creep behaviour of a γ-Ti-48%A1-2%W intermetallic

被引:39
作者
Seo, DY
Beddoes, J
Zhao, L [1 ]
Botton, GA
机构
[1] Natl Res Council Canada, Inst Aerosp Res, Struct Mat & Prop Lab, Ottawa, ON, Canada
[2] Carleton Univ, Dept Aerosp & Mech Engn, Ottawa, ON K1S 5B6, Canada
[3] Canada Ctr Mineral & Energy Technol, Mat Technol Labs, Ottawa, ON, Canada
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2002年 / 329卷
基金
加拿大自然科学与工程研究理事会;
关键词
TiAl plus W alloy; aging; beta o precipitates; creep; W diffusion; alpha(2) decomposition; lamellar;
D O I
10.1016/S0921-5093(01)01630-6
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The results of aging at 950 C for up to 192 h on the microstructure and creep properties of a fully lamellar Ti-48at.% Al-2at.% W is presented. Aging times as short as 5 h result in acicular precipitates of W rich beta(o) along lamellar interfaces, with the beta(o) size increasing with aging time. The beta(o) precipitates nucleate and grow in the alpha(2) lamellar by diffusion of W. Concurrently, the alpha(2) decomposes into discontinuous lamellar. Creep tests at 760 degreesC and 276 MPa indicate that the precipitation of beta(o) along interfaces substantially reduces the primary creep strain, primarily due to the influence of beta(o) on interface dislocation emission and motion. However, aging reduces the extent of tertiary creep and slightly reduces creep life, due to larger and more numerous intergranular beta(o) particles, which serve to initiate intergranular void formation during tertiary creep. The results are discussed in terms of the effect of W solute and beta(o) precipitates on the alpha(2) lamellar stability and are used to infer the influence of microstructural features on the various creep resistance parameters. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:810 / 820
页数:11
相关论文
共 32 条
  • [1] [Anonymous], HIGH TEMPERATURE ALU
  • [2] Beddoes J, 1999, HIGH TEMP MATER PROC, V18, P173
  • [3] Beddoes J, 1995, GAMMA TITANIUM ALUMINIDES, P959
  • [4] BEDDOES J, 1999, MAT RES SOC S P, V552
  • [5] BEDDOES J, 1997, STRUCTURAL INTERMETA, P109
  • [6] BEDDOES J, 2001, IN PRESS J MAT SCI
  • [7] Chen WR, 1999, GAMMA TITANIUM ALUMINIDES 1999, P323
  • [8] A high-resolution transmission electron microscopy study of interfaces between the gamma, B2, and alpha(2) phases in a Ti-Al-Mo alloy
    Das, S
    Howe, JM
    Perepezko, JH
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (06): : 1623 - 1634
  • [9] EFFECT OF W-ADDITIONS TO TI-48AL-2NB-2CR ALLOYS
    FUCHS, GE
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 192 : 707 - 715
  • [10] Herrouin F, 1997, MAT RES S C, V460, P287