Erosive wear behavior of Ti(C,N)-based cermets containing different Cr3C2 addition in slurry conditions

被引：16
作者：
Wan, Weicai [1 ]
Xiong, Ji [1 ]
Guo, Zhixing [1 ]
Du, Hao [1 ]
Tang, Limei [1 ]
机构：
[1] Sichuan Univ, Sch Mfg Sci & Engn, Chengdu 610065, Peoples R China
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2014年 / 45卷
基金：
中国国家自然科学基金;
关键词：
Ti(C; N)-based cermets; Erosive wear; Cr3C2; addition; Mechanical properties; Grain size; TRANSVERSE RUPTURE STRENGTH; VALENCE-ELECTRON STRUCTURE; WC-CO; MECHANICAL-PROPERTIES; GRAIN-GROWTH; CORROSION BEHAVIOR; HARD METALS; MICROSTRUCTURE; RESISTANCE; ALLOY;
D O I：
10.1016/j.ijrmhm.2014.03.013
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the paper, Ti(C,N)-based cermets with Cr3C2 additions were prepared, and the effects of Cr3C2 content on the erosive wear of cermets were investigated in solid-liquid erosion conditions. The results indicated that Cr3C2 addition refined the ceramic grain and improves the mechanical properties of cermets. With the variation in Cr3C2 addition up to 7 wt.%, the cermets showed two different trends of erosion resistance in the 350 rpm and 750 rpm erosion conditions. In the 350 rpm erosion condition, the erosion resistance of cermets was strengthened with Cr3C2 addition because of the improvement of the mechanical properties, and the resistance depended strongly on the mechanical properties. In the 750 rpm erosion condition, the enhanced mechanical properties did not exhibit a continuous increase of the erosion resistance of materials, and the conditions were too severe for the material. Binder loss, grain fracture and then fragments removal were the main deterioration behavior of cermets in the erosion conditions. Furthermore, the grain pull-out played a vitally important role on the degradation of cermets with fine grains in the 750 rpm conditions. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：86 / 94
页数：9
相关论文
共 38 条
[1]   Formation of core/rim structures in Ti(C,N)-WC-Ni cermets via a dissolution and precipitation process [J].
Ahn, SY ;
Kang, S .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2000, 83 (06) :1489-1494
[2]   Cermets surface transformation under erosive and abrasive wear [J].
Antonov, Maksim ;
Hussainova, Irina .
TRIBOLOGY INTERNATIONAL, 2010, 43 (08) :1566-1575
[3]   Effect of size and location of spherical pores on transverse rupture strength of WC-Co cemented carbides [J].
Cha, Seung I. ;
Lee, Kyong H. ;
Ryu, Ho J. ;
Hong, Soon H. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2) :404-408
[4]   Impact resistance of TiC-based cermets [J].
Compton, B. G. ;
Zok, F. W. .
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2013, 62 :75-87
[5]   Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance [J].
Espallargas, N. ;
Berget, J. ;
Guilemany, J. M. ;
Benedetti, A. V. ;
Suegama, P. H. .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (08) :1405-1417
[6]   T1(C,N) CERMETS - METALLURGY AND PROPERTIES [J].
ETTMAYER, P ;
KOLASKA, H ;
LENGAUER, W ;
DREYER, K .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 1995, 13 (06) :343-351
[7]   Correlation of transverse rupture strength of WC-Co with hardness [J].
Fang, ZZ .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2005, 23 (02) :119-127
[8]   Structure-property relationships in liquid jet erosion of tungsten carbide hardmetals [J].
Gant, A. J. ;
Gee, M. G. .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (02) :332-343
[9]   VC- and Cr3C2-doped WC-NbC-Co hardmetals [J].
Huang, S. G. ;
Li, L. ;
Van der Biest, O. ;
Vleugels, J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 464 (1-2) :203-209
[10]   Effect of microstructure on the erosive wear of titanium carbide-based cermets [J].
Hussainova, I .
WEAR, 2003, 255 (1-6) :121-128
1234