Electrophoretic deposition of BaTiO3 films from aqueous suspensions
被引:29
作者:
Zhao, Jianling
论文数: 0引用数: 0
h-index: 0
机构:
Tsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R ChinaTsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R China
Zhao, Jianling
[1
]
Wang, Xiaohui
论文数: 0引用数: 0
h-index: 0
机构:
Tsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R ChinaTsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R China
Wang, Xiaohui
[1
]
Li, Longtu
论文数: 0引用数: 0
h-index: 0
机构:
Tsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R ChinaTsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R China
Li, Longtu
[1
]
机构:
[1] Tsinghua Univ, State Key Lab New Ceram & Fine Proc, Dept Mat Sci & Engn, Beijing 100084, Peoples R China
It was found that BaTiO3 powder could be well dispersed in water using 0.3 wt.% poly(acrylic acid-co-maleic acid) as a dispersant at pH 10. The suspension characteristics were studied in terms of zeta potential and viscosity. Stable suspensions with 5 wt.% BaTiO3 were chosen for the electrophoretic deposition. Voltages between 2 and 6 V were applied to fabricate uniform and defect free BaTiO3 films with a thickness up to 20 mu m. The results show that electrophoretic deposition from aqueous suspension is a feasible, low-cost and environmentally benign method to form BaTiO3 thin and thick films. (c) 2005 Elsevier B.V. All rights reserved.