A novel prediction model for thrust force and torque in drilling interface region of CFRP/Ti stacks

被引:40
作者
Luo, Bin [1 ]
Li, Yuan [1 ]
Zhang, Kaifu [1 ]
Cheng, Hui [1 ]
Liu, Shunuan [1 ]
机构
[1] Northwestern Polytech Univ, MOE Key Lab Contemporary Design & Integrated Mfg, Xian 710072, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Drilling; CFRP/Ti stacks; Interface region; Mechanistic model; Cutting force; COMPOSITE; CARBIDE;
D O I
10.1007/s00170-015-7294-9
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The hybrid structure of CFRP/Ti stacks is becoming widely employed in aerospace structural applications, but drilling the stacks of these two materials at one time is a challenge to manufacturing engineers, especially in the process of drilling interface region, in which the drill edges cut two different materials simultaneously. Excessive cutting forces could result in defects such as delamination, burrs, and interlayer chip, and could also lead to high temperatures and excessive tool wear. In this paper, a mechanistic model is developed to predict the thrust force and torque with time of interface region in drilling of CFRP/Ti stacks. In the model, three-dimensional drilling forces distributed along cutting edges are expressed as the multiplication of transformation matrix, specific energies, and uncut area, which are determined by the drill geometries, cutting conditions, friction, and material properties. A transformation matrix is established to decompose the normal/friction cutting forces on the rake face into tangential/radius/axial forces defined in the drilling coordination. Coefficients of specific energies were calculated from small number of calibration experiments. Experiments were also conducted to validate the model in a wide range of spindle speed and feed rate. The predicted results agree well with experimental results. However, the predictions for torque are lower than the experimental results due to the spring-back of CFRP hole. The model can assist in understanding the drilling process of CFRP/Ti stacks and be used to control cutting forces by selection of drilling conditions and drill geometries.
引用
收藏
页码:1497 / 1508
页数:12
相关论文
共 50 条
[41]   The interface temperature and its influence on surface integrity in ultrasonic-assisted drilling of CFRP/Ti stacks [J].
Shao, Zhenyu ;
Jiang, Xinggang ;
Geng, Daxi ;
Liu, Yihang ;
Zhou, Zehua ;
Li, Shaomin ;
Zhang, Deyuan ;
Zheng, Wei .
COMPOSITE STRUCTURES, 2021, 266
[42]   In-depth tool wear analysis in drilling of CFRP-Ti stacks by DLC coated drills [J].
Khan, Sharjeel Ahmed ;
Royer, Raphaeel ;
Saraiva, Marta ;
Emami, Nazanin ;
Ramalho, Amilcar .
COMPOSITE STRUCTURES, 2025, 363
[43]   Analytical model for delamination of CFRP during drilling of CFRP/metal stacks [J].
Jia, Zhen-yuan ;
Chen, Chen ;
Wang, Fu-ji ;
Zhang, Chong ;
Wang, Qi .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (11-12) :5099-5109
[44]   A subjective-objective evaluation method of hole surface quality in drilling CFRP-Ti stacks [J].
Liu, Shunuan ;
Wang, Ning ;
Zhang, Kaifu ;
Luo, Bin .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2022, 236 (1-2) :64-76
[45]   Mechanical model for predicting thrust force with tool wear effects in drilling of unidirectional CFRP [J].
Bai, Yu ;
Jia, Zhen-yuan ;
Fu, Rao ;
Hao, Jia-xuan ;
Wang, Fu-ji .
COMPOSITE STRUCTURES, 2021, 262 (262)
[46]   Research on Variable Parameter Drilling Method of Ti-CFRP-Ti Laminated Stacks Based on Real-Time Sensing of Drilling Axial Force [J].
Zhang, Zhengzhu ;
Zhang, Ning ;
Wu, Fenghe ;
Teng, Weixiang ;
Sun, Yingbing ;
Guo, Baosu .
SENSORS, 2022, 22 (03)
[47]   Experimental study on drilling mechanisms and strategies of hybrid CFRP/Ti stacks [J].
Xu, Jinyang ;
El Mansori, Mohamed .
COMPOSITE STRUCTURES, 2016, 157 :461-482
[48]   Impact variation of workpiece stiffness on drilling of CFRP/Ti thin stacks [J].
Du, Changlin ;
Fu, Rao ;
Zhai, Wenhao ;
Liu, Jinlong ;
Cui, Guanping ;
Zhao, Meng ;
Wang, Fuji .
JOURNAL OF MANUFACTURING PROCESSES, 2025, 141 :627-637
[49]   Drilling of CFRP/Ti-6Al-4V Stacks [J].
Tashiro, Tetsuya ;
Fujiwara, Junsuke ;
Inada, Keiko .
ADVANCES IN ABRASIVE TECHNOLOGY XIV, 2011, 325 :369-+
[50]   Experimental Study of Thrust Force and Torque for Drilling Cortical Bone [J].
Jianbo Sui ;
Naohiko Sugita .
Annals of Biomedical Engineering, 2019, 47 :802-812