Preparation of Prereduced Pellets by Pyrite Cinder Containing Nonferrous Metals with High Temperature Chloridizing-reduction Roasting Technology

被引：21

作者：

Chen, Dong ^{[1
]}

Zhu, De-qing ^{[2
]}

Chen, Yao ^{[3
]}

机构：

[1] Soochow Univ, Sch Iron & Steel, Suzhou 215021, Peoples R China

[2] Cent S Univ, Sch Minerals Proc & Bioengn, Changsha 410083, Hunan, Peoples R China

[3] Soochow Univ, Sch Mech & Elect Engn, Suzhou 215021, Peoples R China

来源：

ISIJ INTERNATIONAL | 2014年 / 54卷 / 10期

关键词：

pyrite cinder; chloridizing roasting; reduction roasting; prereduced pellet; nonferrous metal removal; PELLETIZATION; ZINC; ASH;

D O I：

10.2355/isijinternational.54.2162

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Pyrite cinder contains considerable amount of nonferrous metals and the iron grade of pyrite cinder is low for blast furnace burden, so processing the pyrite cinder has become a significant issue for the utilization of valuable resources and environmental protection. In this study, a technique with high temperature chloridizing-reduction roasting is presented in aim to remove nonferrous metals from iron and produce blast furnace burden with high quality. The effects of chloridizing temperature and time, chlorinating agent dosage, reduction temperature and time are investigated. The optimum process parameters are determined as follows: chloridizing at 1125 degrees C for 10 min, CaCl2 dosage of 2% and reduction at 1100 degrees C and the coal/cinder ratio of 2.5 for 40 min. Under these conditions, the compressive strength of prereduced pellets is 1147N per pellet, the metallization degree is 84.53% and the removal rates of Cu, Pb and Zn are 37.87%, 99.31% and 80.20%, respectively.

引用

页码：2162 / 2168

页数：7

共 18 条

[1] Potential use of pyrite cinders as raw material in cement production: Results of industrial scale trial operations [J].

Alp, I. ;

Deveci, H. ;

Yazici, E. Y. ;

Turk, T. ;

Sungun, Y. H. .

JOURNAL OF HAZARDOUS MATERIALS, 2009, 166 (01) :144-149

[2]

[Anonymous], 1978, METALLURGICAL LAB CE, P68

[3]

Bai Guo-hua, 2011, Journal of Central South University (Science and Technology), V42, P1509

[4]

Barin I., 1993, THERMOCHEMICAL DATA, P425

[5] Chlorination methods applied to recover refractory metals from tin slags [J].

Brocchi, Eduardo A. ;

Moura, Francisco J. .

MINERALS ENGINEERING, 2008, 21 (02) :150-156

[6]

Fu J. Y., 1995, PRINCIPLES SINTERING, p[292, 302]

[7] Hazard assessment to workers of trace metal content in pyrite cinders [J].

Giunti, M ;

Baroni, D ;

Bacci, E .

BULLETIN OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY, 2004, 72 (02) :352-357

[8] Novel process to recover valuable metals from hydrometallurgical zinc residues [J].

Jiang, T. ;

Zhang, Y. ;

Huang, Z. ;

Yang, Y. ;

Li, G. .

MINERALS & METALLURGICAL PROCESSING, 2006, 23 (04) :214-218

[9] THERMOMECHANICAL STUDIES OF CERAMIC TILE MADE FROM TECHNOGENIC RAW MATERIALS [J].

Kovkov, I. V. ;

Abdrakhimov, V. Z. .

GLASS AND CERAMICS, 2011, 68 (3-4) :128-130

[10]

Li S. C., 1992, SCI TECHNOLOGY YNNXI, V19, P20

← 1 2 →