Microstructural investigation of Si-ion-irradiated single crystal 3C-SiC and SA-Tyrannohex SiC fiber-bonded composite at high temperatures

Silicon carbides (SiCs) are considered as one of the promising candidates for structural and core materials used in fusion reactor and high temperature gas-cooled reactor (HTGR) due to its high thermal stability, and good resistance to irradiation and chemical attack. Single crystal 3C-SiC with less intrinsic defects was used to precisely characterize the radiation-induced defects in 3C-SiC. In addition, there are limited discussions related to radiation effect of SA-Tyrannohex fiber-bonded composite at high temperatures. Therefore, in this study, single crystal 3C-SiC thin film and SA-Tyrannohex SiC fiber-bonded composite were irradiated at 1000-1350 degrees C with 7 MeV Si3+ ion to simulate the neutron irradiation in reactors. The microstructure of the irradiated SiC was examined by using high resolution transmission electron microscope (HRTEM). In irradiated single crystal 3C-SiC, high resolution images showed that the planar defects were extrinsic stacking faulted loop with changing atomic sequences and intrinsic stacking faulted loop, i.e. vacancy loop. In addition, dislocation loops, voids, and edge dislocations in SA-Tyrannohex SiC fiber-bonded composite after irradiation were investigated. Besides, larger voids (with diameter 10-40 nm) formed in alumina with preferred orientation after irradiation perhaps resulting in degradation of strength of the SA-Tyrannohex SiC fiber-bonded composite. (C) 2013 Elsevier B.V. All rights reserved.