Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation

被引：12

作者：

Peng Jian ^{[1
]}

Tong Zhi-Lin ^{[1
]}

Wei Hong-Qing ^{[1
]}

Li Xiang-An ^{[1
]}

Zhang Zhi-Chun ^{[1
]}

机构：

[1] Xiangtan Univ, Coll Civil Engn & Mech, Xiangtan 411105, Peoples R China

来源：

ACTA PHYSICA SINICA | 2009年 / 58卷 / 06期

关键词：

bulk amorphous alloy; creep; EVEV model; creep rate sensitivity index; METALLIC GLASSES; DEFORMATION; INDENTATION; FLOW; TEMPERATURE; HARDNESS;

D O I：

10.7498/aps.58.4059

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The creep behavior of a {[(Fe-0.6 Co-0.4)(0.75) B-0.2 Si-0.05](0.96) Nb-0.04}(96) Cr-4 bulk amorphous alloy and effects of different loading rates on its creep deformation behavior were investigated using nanoindentation technique at room temperature. It is found that the creep deformation of this alloy is strongly dependent on the indentation loading rate: when the loading rate ranges from 3 to 24 mN/s, distinct creep deformation occurs; but when the loading rate decreases to 1 mN/s or 0.75 mN/s the creep deformation is completely suppressed. The creep deformation behavior of the {[(Fe-0.6 Co-0.4)(0.75) B-0.2 Si-0.05](0.96) Nb-0.04}(96) Cr-4 bulk amorphous alloy was modeled using the elastic-viscoelastic-viscous (EVEV) model and a high correlation coefficient (R) of 0.9392 was obtained, implying that this creep behavior studied can be well described by the EVEV model. Based on the EVEV model, the creep compliance and retardation spectrum, which are related to the interior structure of the bulk amorphous alloy, were further calculated by the EVEV model. Finally, the creep mechanism at room temperature was discussed in detail according to the analysis of the creep rate sensitivity index (m) as well as the observation on the morphology of indents using the atomic force microscope (AFM)

引用

页码：4059 / 4065

页数：7

共 36 条

[1] Characterization of the molecular structure of amorphous selenium using recoverable creep compliance measurements [J].

Bernatz, KM ;

Echeverría, I ;

Simon, SL ;

Plazek, DJ .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2002, 307 :790-801

[2] Homogeneous deformation of Zr-Ti-Al-Cu-Ni bulk metallic glasses [J].

Bletry, M ;

Guyot, P ;

Brechet, Y ;

Blandin, JJ ;

Soubeyroux, JL .

INTERMETALLICS, 2004, 12 (10-11) :1051-1055

[3] Anelastic deformation of a Pd40Cu30Ni10P20 bulk metallic glass during nanoindentation [J].

Concustell, A ;

Sort, J ;

Greer, AL ;

Baró, MD .

APPLIED PHYSICS LETTERS, 2006, 88 (17)

[4] Thermal characterization of Cu60ZrxTi40-x metallic glasses (x=15, 20, 22, 25, 30) [J].

Concustell, A ;

Zielinska, M ;

Révész, A ;

Varga, LK ;

Suriñach, S ;

Baró, MD .

INTERMETALLICS, 2004, 12 (10-11) :1063-1067

[5]

Deng YF, 2007, CHINESE PHYS, V16, P2051, DOI 10.1088/1009-1963/16/7/041

[6]

FERRY JD, 1980, VISCOELASTIC PROPERT, P83

[7] Serrated plastic flow during nanoindentation of a bulk metallic glass [J].

Golovin, YI ;

Ivolgin, VI ;

Khonik, VA ;

Kitagawa, K ;

Tyurin, AI .

SCRIPTA MATERIALIA, 2001, 45 (08) :947-952

[8] Nanoindentation studies of shear banding in fully amorphous and partially devitrified metallic alloys [J].

Greer, AL ;

Castellero, A ;

Madge, SV ;

Walker, IT ;

Wilde, JR .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :1182-1185

[9] Deformation behavior of Zr-based metallic glasses [J].

Heilmaier, M .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (03) :374-380

[10] Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation [J].

Jiang, WH ;

Pinkerton, FE ;

Atzmon, M .

JOURNAL OF APPLIED PHYSICS, 2003, 93 (11) :9287-9290

← 1 2 3 4 →