Refilled friction stir spotwelding of aluminum alloy to galvanized steel sheets

被引：84
作者：
Dong, Honggang [1 ]
Chen, Su [1 ]
Song, Yang [1 ]
Guo, Xin
Zhang, Xiaosheng [2 ]
Sun, Zhiyang [2 ]
机构：
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China
[2] China FAW Corp Ltd, Dept Dev, Changchun 130011, Peoples R China
来源：
MATERIALS & DESIGN | 2016年 / 94卷
基金：
中国国家自然科学基金;
关键词：
Refilled friction stir spot welding; Aluminum/steel dissimilar materials; Mechanical property; ZnO; HIGH-STRENGTH STEEL; COLD METAL TRANSFER; ZINC-COATED STEEL; MECHANICAL-PROPERTIES; STAINLESS-STEEL; WELDING PARAMETERS; SHEAR-STRENGTH; LAP JOINTS; MICROSTRUCTURE; AL;
D O I：
10.1016/j.matdes.2016.01.066
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Dissimilar materials lap joining of aluminum alloy to galvanized steel sheets was investigated with refilled friction stir spot welding (Refilled FSSW). For the lap joint between 1.0 mm thick Novelist AC 170 PX aluminum alloy and 1.2 mm thick ST06 Z galvanized steel sheets, the maximum tensile/shear fracture load is 3044 N with cross-tension fracture load of 296 N. For that between 1.5 mm thick Aleris Superlite 200 ST aluminum alloy and 1.2 mm thick ST06 Z galvanized steel sheets, the maximum tensile/shear fracture load reaches 4500 N and the maximum cross-tension fracture load is 359 N. All samples failed through the Al/steel interface during tensile/shear and cross-tension tests. The microstructure, composition, fractogragh and fracture mode of Al/steel joints were analyzed with electron probe microanalysis (EPMA), scanning electron microscope (SEM) and X-ray diffraction (XRD). Zinc and oxygen rich layer were observed in the interface on aluminum alloy side, and ZnO phase was detected on the fractured surface of both aluminumalloy and steel sides. The samples during tensile/shear test failed mainly through shear brittle fracture with features of cleavage and intergranular fracture feature. The spot weld can be distinguished as pin-refilled zone and sleeve-plunging zone due to the distribution of zinc coating. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：457 / 466
页数：10
相关论文
共 29 条
[1]   Microstructure and Mechanical Properties of Friction Stir Spot Welded Galvanized Steel [J].
Baek, Seung-Wook ;
Choi, Don-Hyun ;
Lee, Chang-Yong ;
Ahn, Byung-Wook ;
Yeon, Yun-Mo ;
Song, Keun ;
Jung, Seung-Boo .
MATERIALS TRANSACTIONS, 2010, 51 (05) :1044-1050
[2]   Cold metal transfer joining aluminum alloys-to-galvanized mild steel [J].
Cao, R. ;
Yu, Gang ;
Chen, J. H. ;
Wang, Pei-Chung .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (10) :1753-1763
[3]   Loining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding [J].
Chen, CM ;
Kovacevic, R .
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (11) :1205-1214
[4]   Effect of the surface state of steel on the microstructure and mechanical properties of dissimilar metal lap joints of aluminum and steel by friction stir welding [J].
Chen, Y. C. ;
Nakata, K. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (08) :1985-1992
[5]   Interface structure and bonding in abrasion circle friction stir spot welding: A novel approach for rapid welding aluminium alloy to steel automotive sheet [J].
Chen, Y. C. ;
Gholinia, A. ;
Prangnell, P. B. .
MATERIALS CHEMISTRY AND PHYSICS, 2012, 134 (01) :459-463
[6]   Ultrasonic thermometry for friction stir spot welding [J].
Dharmaraj, Kathryn J. ;
Cox, Chase D. ;
Strauss, Alvin M. ;
Cook, George E. .
MEASUREMENT, 2014, 49 :226-235
[7]   Effects of post-weld heat treatment on dissimilar metal joint between aluminum alloy and stainless steel [J].
Dong, Honggang ;
Liao, Chuanqing ;
Yang, Liqun ;
Dong, Chuang .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 550 :423-428
[8]   Improving arc joining of Al to steel and Al to stainless steel [J].
Dong, Honggang ;
Yang, Liqun ;
Dong, Chuang ;
Kou, Sindo .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 534 :424-435
[9]   Arc joining of aluminum alloy to stainless steel with flux-cored Zn-based filler metal [J].
Dong, Honggang ;
Yang, Liqun ;
Dong, Chuang ;
Kou, Sindo .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (26) :7151-7154
[10]   FRICTION STIR SPOT WELDS BETWEEN ALUMINIUM AND STEEL AUTOMOTIVE SHEETS: INFLUENCE OF WELDING PARAMETERS ON MECHANICAL PROPERTIES AND MICROSTRUCTURE [J].
Figner, G. ;
Vallant, R. ;
Weinberger, T. ;
Schroettner, H. ;
Pasic, H. ;
Enzinger, N. .
WELDING IN THE WORLD, 2009, 53 (1-2) :R13-R23
123